Jack I have one dated 1985 for the KLM "40M-3A", but the boom length is 32' 3", not 42'. Max element length= 46'. If this is what you need, let me know and I will xerox it for either Faxing or sendin
Hi all, Wyatt at M^2 says their big OR2800PDS rotator will fit in this HyGain 52SS crank-up tower if the smaller top plate ( 6" x 6" round) is used. Anyone done this? Any problems? TNX and 73, Craig
TT (and rotator) experts Anyone have any experience with "unsticking" a Hy-Gain HDR-300 rotator? Seems to be stuck at one end of the travel (0 degrees) on the CCW limit switch. Solenoid buzzes and re
TT experts For a Hygain HDR-300 rotator, is it the same pair of pins (5-8 for CW and 4-6 for CCW)? TNX and VY 73, Craig WA6OXK -- Forwarded message follows -- From: "Barry " <w2up@mindspring.com> To:
TT experts For a Hygain HDR-300 rotator, is it the same pair of pins (5-8 for CW and 4-6 for CCW)? TNX and VY 73, Craig WA6OXK From: "Barry " <w2up@mindspring.com> To: Tom Carrubba KA2D <ka2d@arrl.ne
Hola Tower-talkians, Agree that "Press" at the The Wireman in South Carolina (www.thewireman.com) is awfully good and knowledgeable, but the Davis Group in NH and MASS (www.davisrf.com) also have spe
Steve As per M^2's Orion 2800PDC manual: "The Rohn 25G tower is the smallest that will accept the OR-2800PDC positioner and only in the top section that tapers into a mast guide-tube. The positioner
Jim My 2¢ says go for the Orion 2800- it will turn a huge house with ease. Plus, US made and well supported by the M^2 folks- Wyatt Lyzenga at M ^2 in Fresno (559.432.8873 Ext 15) is very helpfu
Charles, You can not go wrong by over-engineering this component- The M^2 Orion 2800 can literally turn a house without breaking a sweat, and the service and personal attention from the M^2 folks in
Greg, In terms of brute strength, quality of worksmanship, and dedicated customer support from Wyatt Lyzenga and colleagues in Fresno, I don't think you can beat the M^2 Orion OR2800 PDC rotator base
Bill M^2 Orion 2800-P can literally turn a house without breaking a sweat. Plus, great support from the Wyatt and the guys at M-squared in Fresno. Mine has been swinging a KLM KT-34XA and KLM 40M3A a
Bob Shoot me your FAX number off line and I will FAX you a copy of my manual (circa 1989) in the morning. Craig WA6OXK Date sent: Tue, 31 May 2005 12:44:37 +0800 From: Bobby Wilber <bobbywi@gmail.com
Tower Talkians and KLM afficionados The PDF is not atatched here due to the militation of the reflector, but this URL should get anybody there who might also need a KLM manual for a KT34Xa or a KLM 4
If any poor soul should ever need the original 40M-3A manual and dimensions (circa 1986), I have a PDF and would gladly share it. 73 Craig WA6OXK _______________________________________________ _____
Steve No longer can find your HD replacement clamp on Champion Radio web site. Status? TNX and 73, Craig WA6OXK _______________________________________________ _______________________________________
Matt is, indeed, Mike's son. Craig WA6OXK On 10/20/2016 1:51 PM, K7LXC-- via TowerTalk wrote: Does anyone at M2 read towertalk? It should not be that difficult to build a better mast clamp. No. Sever
See attached. My antique is still up and functioning fine. 73 and GL Craig WA6OXK On 2/6/2017 9:14 AM, jcjacobsen@q.com wrote: From N2MA: I am trying to rebuild a KLM 40M3 and have not been able to f