www.mouser.com Easy to order and pay. No minimum order. 73, Jim W7RY I need to replace the chassis mount F connector on my HiZ amplifiers What`s a good source to buy them? I don't think so, but is t
Jack (Socket) Panel Mount F Type RF Connectors / Coaxial Connectors Mouser <https://www.mouser.com/c/connectors/rf-interconnects/rf-connectors-coaxial-connectors/?gender=Jack%20%28Socket%29&mounting%
PB Blaster is what to use on the rusted screws/bolts. Jim W7RY https://docs.google.com/document/d/1NDS74xCHVXLB8GLko_-f7zHC3tTk6H9k4q3HR0PNITE/ Syl - VE5ZX On 2023-07-30 9:26 a.m., VE5ZX wrote: I hav
Just ask your question here Don.... Jim W7RY I've some questions re this connector for indoor HF cable applications. Don W7WLL _______________________________________________ ________________________
(earthing) and bonding. You will find very few molds for #2 AWD *stranded is a different* OD than solid. Jim W7RY On 8/19/2023 11:28 AM, Lux, Jim wrote: On 8/19/23 9:12 AM, jim.thom jim.thom@telus.n
What size? Jim W7RY Bill K4XS/V31XX _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contes
Nevermind... Size in model dependent. its 36-44. Jim W7RY -- Thanks and 73, Jim W7RY _______________________________________________ _______________________________________________ TowerTalk mailing
Weller Pyropen with very large tip. Works super for outdoor antenna work. Even solders a PL-259 onto RG-213. They are most likely over $200 bucks now! 73 Jim W7RY Long time since I've posted, but rea
Agreed with heating the box... Shove a rag (a long one to provide lots of area to keep the moisture out) into the conduit that comes from the underground. Ventilate the box on the bottom with a scre
towertalk@groups.io allows attachments. 73, Jim W7RY This reflector is plain text only. 73, Jim K9YC _______________________________________________ _______________________________________________ To
Something else to consider for coating the plate Stan is FlexSeal. Flex Seal Family of Products | Official Store | flexsealproducts.com <https://flexsealproducts.com/#1> I'm going to try it on my 40
Still available and current production from several sources. 73, Jim W7RY Larry _______________________________________________ _______________________________________________ TowerTalk mailing list
Call Rohn on the phone. They can most certainly help you. Jim W7RY Have a project underway for an NPO that we need assistance on: Our team is deploying a VHF AZ/EL mount. It has a need to be as clo
From the City of Ozark Missouri: https://ecode360.com/28909976?highlight=tower,towers&searchId=9695514651952489 /Exemptions./An antenna andtowerfor the following uses are *exempt from these requireme
Did you see my posting from the City of Ozark? Its even better. If its an amateur antenna tower, its exempt! No permits needed. Now that's freedom! Jim W7RY This is not about ordinances - unless that
We had one at our WA7EGA contest station years ago. Its for a Hy-gain rotor. We used it on a tailtwister. I'm sure a google search will turn up a manual. I don't have a manual. 73, Jim W7RY On 12/18
There is a site in Portland Oregon (Mt. Scott) that has lots of tuned/decoupled towers, because they are near an AM broadcast site. The AM station was having issues with their directional patterns. T
Attachments are not allowed on this list. That is ONE reason that I started towertalk@groups.io. 73, Jim W7RY 73, geo - n4ua Tom, I have two PP in service, both on Rohn 45. For both, I fabricated a c
Its both. https://scmsinc.com/product/andrew-hj8-50b-3-air-cable/ Jim W7RY On 1/20/2024 7:56 PM, Danny K5CG wrote: I recall when I was in my 20s (young and stupid) I worked for LeBlanc & Royle in Can
There it is! 3 inch air Heliax right there in the back of the SUV. They had time to burn it, (it looks burned, maybe they just stripped the jacket off of it. But the jacket is pretty hard to get off)