I am using 2 Sylvania lights, 13W CF13EL/MINI SPIRAL and 23W CF23EL/MINI TWIST/BL/3 with no problems 160-2M. Both are within 2 feet of the radios. Arne N7KA __________________________________________
I believe you have tower sections manufactured by HEIGHTS. I used to have a catalog and remember the sections were 8ft long. UNIVERSAL TOWERS makes their aluminum sections 10ft long. Try this site: h
That sure describes the old KLM 144-148-11 from a 1981 catalog from KLM. If no help forthcoming try to see if Mike, K6MYC, at M2INC still has any info on this old antenna. Atrne N7KA ________________
I have very good luck with any large tubing of any kind and getting a square cut. Just wrap a piece of paper (I use printer paper) around the tubing and align the edges that overlap. I then tape the
Using my previous paper for marking a cut line, remove paper from tubing ande flatten it out making a crease in the paper. Each crease is 180 degrees from the other. result a NO measurement method of
Wench (definition) 1. A young woman: derogatory term. 2. A servant. Winch (definition) 1. A crank with a handle used to transmit motion 2. A machine, for hoisting or pulling,with a cylinder on which
Here is a link to a Big Bertha from Array Solutions. More thatn 1 source over recent past. _______________________________________________ _______________________________________________ TowerTalk ma
Has anyone converted a 105BA/105CA to an OWA design? Adding elements is OK. Longer boom OK. Its the element taper and spacing issues. Must be capable of side mount on swinging arm mounting on rohn 45
This is where a creative imaginaion rules. Go to the local home improvement store (with your tubing) and look thru the PVC plumbing for reducers and other items. It very possible to find some way of
This site lists by product number the Dow Corning ssealants types that are of Alkoxy cure http://www.dowcorning.com/applications/search/default.aspx?Ne=40&N=4294963244+3887&DCCD=PRODUCT&DCCT=PRODUCT&
Thats is what its called on the wrapper. Its manufactured by Plymouth (made in USA) and has catalog no. 2002. Description. A self-fusing rubber tape for waterproofing and insulating electrical connec
SCOTCH BRITE or similar nylon scouring pads and water. Pads usually found at home improvement stores. Why mess with WD40, kerosene, etc that create a mess and then must be cleaned off. Use wet scouri
Here is info on modifying the A50-5S http://www.6mt.com/A50-5S_w5wvo.pdf Bill, W5WVO, uses a stack of 2. Arne N7KA _______________________________________________ ____________________________________
I HIGHLY recommend the GREEN HERON RT-20 or RT-21 control for prop pitch motors. It is by far the best system I have used. Not a problem ever using it. It is SIMPLE to set up and the preset pot for d
Antennas on RR Tracks I have seen 2 antennas on RR (type) tracks. The 76M dish at Jodrell Bank in England and the 45M dish located on Stanford University property in Calif (visible from HWY 280 betwe
I remember seeing a similar long 20M yagi on cover the of CQ Magazine a few years back. Elements supported on old telescoping Army surplus masts. Arne N7KA ___________________________________________
Try calling a supplier of bearings in your area. They may have them. My local bearing supplier carries them. Dig out the business phone book and look under BEARINGS. Arne N7KA _______________________
I would like to get opinion/experiences from folks WHO HAVE USED a PL-259 compression clamp style connector. They install similar to a type N connector. Here is a web page for a mfr/dist. Also, is ce
Sorry. Here is the correct link: http://www.hestonsupply.com/site/558895/product/1319671 Arne N7KA _______________________________________________ _______________________________________________ Towe
Go to Cushcraft manuals site for info. Many manuals listed and the 617-B6 is listed. Here is site: http://www.cushcraft.com/amateur/support/instruction-manuals.htm Always good to have a mnaual for th