Gentlemen, One of our club members has been told of a Force 12 antenna for sale. He is trying to identify the antenna. The antenna is on a 36 ft boom with 14 elements. I looked in the Force 12 brochu
Gentlemen, I have a KLM kt34xa currently on the ground for maintenance. I'm replacing the plastic caps. Should I change the element dimensions = and spacing per the M2 design? Will this work with the
Thanks everyone for their comments regarding upgrading the kt34xa to the = kt36xa. Based on the group's comments I went ahead and purchased the = upgrade kit. Noll W9RN -- StripMime Report -- process
Gentlemen, I'm in the process of upgrading a kt34xa to a kt36xa. This involves = disassembling the element tips. 8 of the 10 element halves came apart = without any trouble even though the antenna ha
Gentlemen, My tower is currently stripped of all antennas and rotator. This may be = the time to put my tower/ antenna system in first class shape before = the cold Wisconsin winter). I have had a Tr
I own (2) Tri-Ex LM-354 (54ft) crank up towers. Both are currently up and I have had NO problems (hope this doesn't jinx me :) Neither tower has had the cables replaced. 1st tower has been up since A
Mark, I have been using the slipp - not clamp since April 2004. The clamp is used on a tailtwister. The rotor turns a kt34xa and a 5 el 6 mtr beam. Before installing the clamp, I would have to re- or
Scott, Been using a tuner built by N4XM (XMATCH) for the last couple of years. No problem (no arcing etc) running 1500 watts from 87a on 160. 73 _______________________________________________ See: h
John, I have used one for about 4 years with excellent results. Excellent results means I have NOT had to climb the tower and reorient the antenna after a high wind since installing the Slipp - Nott"