- 1. [TowerTalk] FW: Installing large Yagi (score: 1)
- Author: "Thomas C. Cogsdell" <n4xvp@yahoo.com>
- Date: Sat, 28 Aug 2004 22:14:35 -0500
- I am about to install a Moseley TA-53 (the boom is 20 feet long)as the lower antenna on my 62 ft Rohn 25 tower. For the life of me I cannot come up with a good idea. There are two sets of guy wires,
- /archives//html/Towertalk/2004-08/msg00634.html (7,547 bytes)
- 2. Re: [TowerTalk] FW: Installing large Yagi (score: 1)
- Author: "Tower (K8RI)" <tower@rogerhalstead.com>
- Date: Sun, 29 Aug 2004 01:48:26 -0400
- If you have the room at the tower you can try what I did. I took mine right up the side of the tower, rotating the antenna at each of the three sets of guys. There are two photos about half way down
- /archives//html/Towertalk/2004-08/msg00635.html (9,531 bytes)
- 3. Re: [TowerTalk] FW: Installing large Yagi (score: 1)
- Author: "Mike Rhodes" <weightdn@adelphia.net>
- Date: Sun, 29 Aug 2004 10:20:05 -0400
- Tom, I had a similar problem not too long ago. I had loaded the mast as I pushed it up, with the HF antenna being the last antenna up and to be at the bottom of the mast. Hindsite being 20:20, I migh
- /archives//html/Towertalk/2004-08/msg00639.html (10,475 bytes)
- 4. [TowerTalk] FW: Installing large Yagi (score: 1)
- Author: "Larry Schimelpfenig" <k7sv@adelphia.net>
- Date: Sun, 29 Aug 2004 17:55:43 -0400
- Tom, Search the archives for info on using a PVRC mount. Today I helped get a second 4 element SteppIR in place on one of my pals towers using the PVRC mount/process. I think the only way we could ha
- /archives//html/Towertalk/2004-08/msg00648.html (7,623 bytes)
- 5. RE: [TowerTalk] FW: Installing large Yagi (score: 1)
- Author: "Thomas C. Cogsdell" <n4xvp@yahoo.com>
- Date: Sun, 29 Aug 2004 17:06:28 -0500
- My thanks to all who sent suggestions for mounting my TA-53 on the tower.. It appears to me that the "Tram" is the way to go for my situation. A special thanks for the hint to back guy the tram. I do
- /archives//html/Towertalk/2004-08/msg00649.html (7,724 bytes)
- 6. Re: [TowerTalk] FW: Installing large Yagi (score: 1)
- Author: Mike <k4gmh@arrl.net>
- Date: Sun, 29 Aug 2004 19:56:36 -0400
- Hello Tom, You may want to look into using a PVRC Mount and assembling the TA-53 at the top to see if this approach can work in your situation. This technique was used to assemble a 4 element SteppIR
- /archives//html/Towertalk/2004-08/msg00651.html (9,274 bytes)
This search system is powered by
Namazu