Left radio comes out on the left stereo channel (tip), right radio on the right channel (ring). red right ring If you look at the playback volume control (right-click the speaker icon in the system t
Just because a sound board produces less than a 7f test result, that doesn't mean that it won't work. SB Live 24 is an example that I'll be using this weekend. Try yours and see if it works. Don't fo
WL/Setup/select rtty single tx lockout - last one wins. Dave Hachadorian, K6LL Yuma, AZ . _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.co
wl/radio/number of radios/2 a double qso entry window opens click in the top qso entry window, then window/rtty window click in the bottom qso entry window, then window/rtty window Dave Hachadorian,
-- Perfecto. Then use com ptt to put the radio in tx mode. Dave Hachadorian, K6LL Yuma, AZ _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.c
Does your radio support RS-232 PTT? Give that a try. Dave Hachadorian, K6LL Yuma, AZ . _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.conte
On RTTY, Writelog currently highlights any word after DE. I think this rule is more trouble than it's worth, and should be eliminated. If you are on the receiving end of a pileup, you will quite freq
-- I think you are mixing up setup/SCP and file/exchange from ADI file. For the SCP files, get CW and SSB files from http://www.k5zd.com/scp/ For RTTY, get SCP files from http://www.rttycontesting.co
Try here http://www.rttycontesting.com/downloads/downloads.htm Scroll down to "keyboard templates." Dave Hachadorian, K6LL Yuma, AZ . _______________________________________________ WriteLog mailing
I would like for there to be an option to disable highlighting callsigns after DE. In the NAQP RTTY this past weekend, DE highlighting was more a detriment than a benefit. Here were the problems I no
Here's something to check. The mic input jack is a monaural input, but it requires a stereo plug, with audio on the tip, and shield on the shell. There should be no connection to the ring. There is a
Let me guess at what you are doing. I will guess that you are using AFSK tones 2125/2295 with the TS-850 in the LSB mode. The 850's bandpass is centered around 1500 Hz in LSB, and your 500 Hz filter
Try this method from k2qmf. It worked for me. Dave Hachadorian, K6LL Yuma, AZ -- Hello All, I have spent many hours trying to get Direct I/O to work on my new computer so that I could send CW via my
-- Everything I've read indicates that you need to use third-party programs DLPORTIO or DIRECT I/O to get the parallel port to work with XP. Are you using one of these? If not, I think it is hopeless
Quite a few 7QP score postings from W7's are showing up on 3830 with more than the maximum of 63 available multipliers. The latest one says that he used Writelog, so maybe all the bad scores are from
I agree. Use K2QMF's setup procedure: -- Anyway here is the way to do it: 1 - Open the Direct I/O control panel. 2 - In the I/O Ports Tab enter the BEGIN and END address. For LPT1 it is 378 and 37A.
-- Original Message -- From: "Don" <af4z@cfl.rr.com> To: <writelog@contesting.com> Sent: Friday, May 26, 2006 12:04 AM Subject: [WriteLog] LPT Portd not available after installing Direct IO When I lo
-- BEFORE starting Writelog: 1. Right-click the speaker icon in the lower right tray. 2. Left-click "adjust audio properties." 3. Left-click "audio" tab. 4. Select the correct sound card for recordin
-- Well, you could dedicate several F-keys to RTTY, such as: cq hiscall+exchange tu%L mycall These F-keys would have the required %E, etc for rtty. Dave Hachadorian, K6LL Yuma, AZ . _________________