FYI ... Version 1.340 of the Orion firmware has been posted to www.rfsquared.com The programmer's reference material for writing software for Orion is also now posted at www.rfsquared.com 73 Scott Ro
I don't know what version you have there Doug ... but ... Here mine shows up as "The World Wide AA5AU RTTY WPX" ... and then it asks me ... "Would you like to enter as a SWL?" B-) 73 Billy AA4NU
There's much to be said about the above as to using 2 rigs, 2 computers, etc. <it's what I do here, and have for years so I don't have to change the station around for SO or MS ..> The "GOTCHA" is S
sometimes Tom, That's the way it works (and why I asked if the INTERNAL keyer was on). What I've done here is used the computer AND an external keyer with paddles ... into a Y into the MP's rear key
Bill, Every one of my RTTY QSOs here have been made with a pair of KAM+'s ... never noticed or had a report of skipping ... (poor typing yes, skipping no). Be glad to try and swap setting/etc. here,
history definitively Two thoughts ... one is that the setup being used to read the file is not exactly the same as the FD setup ... as to the same fields being used, or not used. That may cause an i
Jim, Before you drown yourself in applauding the ARRL ... for their efforts to cut costs ... Guess what ... that's WHAT we were told earlier this year ... and you know I am a business type (MBA/corp
Seems like some of the earlier 950SDX's did have some issues ... I recall one of the locals here having some problems with the NA software ... seems like he ended up sending the rig back to Kenwood
OK, seems like I am getting the "Server Busy" message on a frequent basis now while using WL for general RTTY ... I recall this has come up before ... Cause and cure please ? TU 73 Billy AA4NU
Here this happens with a log with NO QSOs in it ... I use WL to work RTTY during non-contesting times. Same here ... 32M of RAM, 486DX100 ... Geoclock "may" be part of the problem ... will do some m
Yup ... try that again ... this time, start with a NEW file name, like XETEST2 setup for the same contest ... THEN "import" the ADIF file INTO that NEW file ... NOT into the old file ... When you "d
I am using the KAM+ here with each rig and WL. Make sure the KAM baud setting and the baud setting in your WriteLog.INI are the same, or you'll have problems at startup. Check that and if you are sti
Hi, K4OOO's is "almost" ready to rumble in the ARRL Roundup ... Almost in that we can't seem to get his IC-761 to key up with AFSK and WL ... What we know ... P-166, 64m RAM, WL10.28, sound card usin
Problem was the IC-761 was NOT keying, we did have the tones at the rig ... but another user provided a means for this to work. Thanks to John, Ric, and others for suggestions, and I am posting this
That's option is useful ... but is not what is being asked for by more and more users ... read the requests carefully ... what is being asked for is more options for when in the S&P mode of logging.
Each rig here uses an ICE # 196 "Front End Protector ... as well as Dunestar 600 bandpass filters. Key is to measure the amount of RF coming back down/into the coax line(s) on one rig when the other
Scot, On behalf of all of those using or working toward using WriteLog, a big TU is due to you ... your site is VERY useful as a how-to guide ! 73 Billy AA4NU
Several years ago I added the 4 port * ISA * versions to the home-brew computers here. Once set up properly, they have worked well with any program I have tried. 73 Billy AA4NU