I'm trying (for the first time) to get Writelog, MMTTY, the MMTTY plug-in and an MK2R+ running for a few QSOs before the ARRL RU ends. I can receive RTTY fine. I'm sending carrier only. When I have W
Plain MMTTY, without Writelog, will send FSK. So it's something I have wrong between WriteLog, MMTTY Plug-in and MMTTY. I'm trying (for the first time) to get Writelog, MMTTY, the MMTTY plug-in and a
Joe, thanks (again) for your suggestions. I did find and checked the Strict BPS checkbox on the Ports tab. I added a couple of characters to each of my RTTY messages in the Writelog memory setup. I u
I found out that when I select "K1EL winkey" on the Writelog Ports tab that it sets cwtype=6 in the [Ports] section of writelog.ini. So cwtype must be the result of selecting one of the CW keyer type
I acquired such a cable from microHAM (Joe Subich) for my K3. It was a special order. All the connections are on the back, headphones, microphone, keying. There are also microphone and headphone conn
I shopped for a similar need and ended up with a US Interface Navigator that includes a sound card and a WinKey as well as the other rig control functions. The connection between the interface box an
Sounds nifty! Maybe cutting the audio cables and installing a couple of 3.5mm stereo plugs is in order. What do you use for CW keying? I'm done with CW generated by the PC serial or parallel ports. I
You're right, many people have success with this. I think most of my negative experiences have been in multi-op operations where the computer was busy reading packet spots, maintaining a largish shar