Plain MMTTY, without Writelog, will send FSK. So it's something I have
wrong between WriteLog, MMTTY Plug-in and MMTTY.
From: Dick Dievendorff [mailto:dieven@comcast.net]
Sent: Saturday, January 05, 2008 3:46 PM
To: 'WriteLog@contesting.com'
Subject: WriteLog, MMTTY plug-in, MK2R+, Carrier only on transmit
I'm trying (for the first time) to get Writelog, MMTTY, the MMTTY plug-in
and an MK2R+ running for a few QSOs before the ARRL RU ends.
I can receive RTTY fine.
I'm sending carrier only.
When I have Writelog shut down, the microHAM router Ports tab, FSK says
"COM 6" and the PTT checkbox is checked. When I click Test and listen on
another receiver, I can hear FSK. I believe therefore that my MK2R is
keying the rig (PTT) and shifting frequency (FSK).
The radio is an IC-7800 in RTTY mode.
When I fire up WriteLog 10.42D and configure the ports, I have selected COM6
in the RTTYrite window and have checked Software generated FSK DTR.
Under RTTYrite TU type (MMTTY) MMTTY settings, Misc tab, the Tx port shows
COM -Txd (FSK) selected, but it's greyed out. AA5LU's very nice tutorial
tells me that this is an indication that a port has not been selected. But
I think I have selected the Port in the Rttyrite window, it's COM6.
Obviously I'm missing a step. Can anyone suggest a way to get TX FSK
working?
TU & 73 de Dick, K6KR
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|