I Googled and found: http://www.k8zt.com/zero.html Jim N7US It's called Andale Mono. I can't find it on the web site where I originally downloaded it, but I can email it to whomever needs it. It's ab
I recently replaced my PRO3 with an FT-2000D. My recollection is that %O used to work properly when I had an FT-1000MP, but it's not working the way it should with my FT-2000D. It turns off the RIT a
Jerry, So what has to be changed in Writelog to use the "RC" command to clear the clarifier? Jim N7US Jim, That is what I concluded was going on with my FT2000 during the RU. The %O function seems to
I just checked how N1MM works, and it clears the RIT and leaves it on, so it does it correctly. Jim N7US Jerry, So what has to be changed in Writelog to use the "RC" command to clear the clarifier? J
Are there any soundcards that work with Windows 7 64-bit that score 7f with Writelog's SBrdChk.exe program? Jim N7US _______________________________________________ WriteLog mailing list WriteLog@con
I just installed Full V10.77 on a new Windows 7/64-bit computer. I can't find the customizable writelog.ini file in C:\Users\Jim N7US\AppData\Local\VirtualStore\Program Files (x86)\Writelog. Is that
When I try to select MMTTY as the TU type I get an error dialog box: MmTtyTnc: Can't start MMTTY! The requested operation requires elevation. I click OK, and it brings up the box to select the MMTTY
MMTTY is really in C:\Ham|MMTTY. I copied in some of my old writelog.ini so maybe that caused the problem. I don't see a problem with Norton Internet Security. MMTTY works OK standalone though it doe
Don, That was a good suggestion, starting with no writelog.ini and creating a new one, but it still didn't work. I'd guess it's a Windows 7/74-bit issue and User Access Control, which is activated wh
I fixed the UAC problem by removing the compatibility settings I had for MMTTY, which is installed in the C:\Ham\MMTTY folder. MMTTY now runs fine standalone without the UAC screen of Windows 7. Now
I recently bought a DXP38 and am setting it up in Writelog's clone mode, along with MMTTY. The on-screen tuning indicator that Rttyrite brings up is probably the same as the other hardware TUs I've u
Would someone refresh my memory and tell me how to have two RTTY decoders, MMTTY and a DXP38, running in separate windows with the same VFO/receiver? Thanks. Jim N7US ________________________________
Eric, I haven't tried it with WL but you should be able to telnet to telnet.reversebeacon.net port 7000. You'd probably want to set your filters so you see spots from states/countries with the beacon
I can't find how to set up WL for SO2V (with a K3 if that makes a difference). Jim N7US _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.cont
I have the K3 configured with the two-slot setup (thanks, W0YK). I have both MMTTY, which uses an MMTTY-L folder, and a cloned receiver/decoder, which is a DXP38, working for the main receiver. MMTTY
I can get the second Rttyrite window for my K3 subreceiver to function properly if I choose either Soundcard AFSK or my HAL DXP38 but not with MMTTY. I am pointing [Rttyrite2] to an installation of M
I had a problem with MMTTY too. I had to go back to my reflector postings last July to see what I did then to solve the problem. (I actually stumbled across the solution myself, I think.) I have it w
I recently started using the new K3 rig driver that maps to VFOA in one entry window and VFOB in the other. When I change the focus to entry window #2 for VFO B, the subreceiver, the audio from VFO A
I recently updated to 10.87 and I am having a problem with MMTTY plug-in. After opening the Rttyrite window, I get a small box that says "Initializing MMTTY Please Wait" and it doesn't go away. MMTTY
I now have Rttyrite windows running for both radios (actually a K3 in SO2V) but the first window has the full MMTTY program running, not just the control panel. Both work OK but I don't want or need