When I try to select MMTTY as the TU type I get an error dialog box:
MmTtyTnc:
Can't start MMTTY!
The requested operation requires elevation.
I click OK, and it brings up the box to select the MMTTY folder. When I
specify C:\Ham\MMTTY I get the same error message and have to close the
Rttyrite window.
Jim N7US
-----Original Message-----
I've had some discussion with AA6YQ who is currently maintaining
MMTTY concerning userpara.ini. Dave confirms my understanding
that userpara.ini is opened from the MMTTY program directory.
Remember MMTTY is not UAC aware - having been written long before
either Vista or Windows 7. However, by default MMTTY is installed
in c:\Program Files(x86) which is a "protected directory" in both
Vista and Windows 7. User applications are not permitted to write
to "protected directories" and this may cause a problem with both
userpara.ini and mmtty,ini.
The suggestions are:
1) do a fresh installation of MMTTY in a directory other than
c:\Program Files(x86) ... try c:\MMTTY or c:\Ham Programs\MMTTY
2) Mark MMTTY.exe "Run this program as and an administrator"
a) Navigate to C:\Program Files(x86)\MMTTY\MMTTY.exe
b) right click on MMTTY.exe
c) Select "Properties"
d) select the "compatibility" tab
e) check "Run this program as an administrator" in the
Privilege Level box
I have never seen the "userpara.ini" error but all of my ham programs
are installed in a separate directory tree on a separate hard drive:
(d:\Ham Programs\<application>).
73,
... Joe, W4TV
On 7/9/2010 7:34 PM, Don Hill AA5AU wrote:
> Nothing I have done has been able to get rid of the USERPARA.INI
> error on startup of the MMTTY when selected as TU in WriteLog. I
> mentioned in my previous post that the error does not occur directly
> after a reboot. But I've also found that directly after a reboot,
> the first time I run WriteLog, my soundcard is either "deaf" or
> "dead" - no audio apparently getting through it to show up in the
> MMTTY display. Closing Rttyrite and reopening Rttyrite (or WriteLog)
> causes the soundboard to start working again. This happens on both
> the internal sound card to the PC and the Codec soundcard in the
> IC-7600.
>
> I've decided not to spend any more time on it right now unless I can
> think of something different to do. But complete full installations
> of WriteLog, MMTTY and the MMTTY plug-in didn't solve the problem.
>
> 73, Don AA5AU
> http://www.aa5au.com
> http://www.rttycontesting.com
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|