I have recently converted my station over to using Writelog in a SO2R configuration. The computers in my shack run WIN2K and WINNT. If you want to run SO2R or utilize Writelog?s Band Data, a parallel
I originally tried to use Writelog in an SO2R mode for SSB/CW without using one of the commercial SO2R boxes. My goal was to make a traveling compact SO2R setup with 2 rigs and a laptop with USB/RS23
I observed the functionality listed below, in the WPX RTTY test. My configuration is WL 10.45M, WIN2K, SO2R, with two instances of MMTTY, FSK, 2 PCI 128 SB sound cards. (1) The Timed CQ time you spec
We had a problem with WL in this past CQWW CW test. Towards the end of the contest, a call of 0M (zero mike) was entered in the call field, of the entry window, followed by the Enter key. WL Immediat
SETUP: I use the 'Enter Sends Exchg/QRZ' option, under the Entry menu, in WL for SSB tests. This maps 3 selectable function keys to play one of three messages when the Enter keyboard key is pressed.
After working the RDXC test last month, I have noticed the following errors in WL data files that support this contest. The cty_rus.dat file has several errors: Yaroslavskaya prefix should be 'YR' no
I was not available to comment on the recent ESM postings. All of the ESM comments, I read, did not address the functionality I want. I would like to use the 'Enter sends exch/QRZ' mode, under WL Ent
Tnx to K0XU and W6IHG for their comments. As far as Fkeys goes it is a nice application. However, my requested change will benefit WL in a High qso rate RTTY SO2R contest. When you are trying to inte
I recently upgraded my PC to a new Intel motherboard. The board does not have a built-in LPT port. I added in a byterunner LPT PCI card to solve this problem. Since the card is a PCI card it cannot u
I recently ugreaded my contest computers to XP. I use WL with an SO2R configuration. I need the LPT port to control my hardware. I have been using Direct-IO under WIN2000, in the past. I am now using
I have a few corrections/enhancements to this PortTalk posting. When you edit your writelog.ini file, The LPT1=0x???? Goes in the [Ports] section of the file. If your desktop or launch icon is not a
If your using a Desktop PC, a simple inexpensive solution I have used is to buy a PC with at least one PCI or PCI express(narrow) expansion slot. You can purchase LPT cards for these slots for ~ $30.
It should be noted that INPOUT32.dll is a potential solution to the LPT problem for Writelog. In order to use INPOUT32.dll WrietLog would need a few code changes. I mentioned this to the WriteLog own