Barry, I think this is a fault with the 756proII, not with Writelog. When I manually set a split, the radio reports out the frequency of the active VFO (which ever one I have selected) and does not r
Ed, Please download the latest namedmul.ini from the WL web site and that should work. Jerry, W6IHG -- Dr. Jerry R. Pixton, PIXOS Designs LLC http://www.pixos.com/designs/RadioTuner/ jpixton@shentel.
Dennis, The problem is the FT1000mp has a software bug that cancels the PTT command after the first cw element so another PTT signal is needed for CW. Sad but so far true in all the 1000mp. The CAT c
Al, Interesting. What serial number is your Yaesu FT1000mp. Most of the responses that I got from Yaesu FT1000mp owners when I worried this problem several years ago was that their and my FT1000mp fo
All, I just tried to move from version10.39 to 10.40 on my computer which has Windows 2000 installed on Drive C and Windows XP installed on Drive F. I was able to install a full version of WL and the
BTW when I did the 10.40 upgrade and it started the network services there is an error message about "can't bind to DSDM Services". Is this any thing I should worry about? I am running Win XP and do
Mike, et al I was going to ask a similiar question. After many times trying to find the culprit and fixing what I thought was the problem, I now am seeing it occur in the following situation - My two
Bill, I don't see any "Utilities" item on my Writelog menu bar. I had to delete the entry for AH3D that is in the wl_cty under United States - which seems, properly, to override the KH3 entries. That
Hi all, Here is my puzzle for today. I have been running my W5XDmulti+ keyer in series with the rig control for my FT1000mp on one on the native comm ports (Com1) for a long time with no problems. To
All, I found a clue to the function key with mmtty 1.63 hang up. It is when AH3D finally makes out YOUR call and returns to YOU that the function keys for replying don't work - then they send out sev
Wayne, Dick, et al Thanks for the information. I have gone back to the native serial comm port I have been using for ever with this device. I have never had any problems there. I was trying to free u
Me again, Is any one using MMTTY 1.62 or 1.63 on a dual processor computer? Copy from mmtty is very bad on my new dual processor computer. I did a side-by-side with the old computer (single processor
Actually it does if you happen to have a radio with a bug in it, like the FT1000mp which drops the PTT after commanded via the CAT when in CW mode. So the only way to have CAT control for other modes
Blake, Put it right after all the comm rates in the [Ports] section CommSlot3=5 and save the file. Restart Writelog and set up your rig. You should see Com5 in row 3 now. Jerry, W6IHG At 06:24 AM 2/5
All, I am embarrassed to say that I had the same stuck function keys twice during the contest - using just the Rttyrite decoders on two radios. Again I just waited but by then there were about eight
Andrea, Please download the new namedmul.ini file from the Writelog web site. This has all these multipliers set up correctly. DC sometimes belongs to Maryland MD, sometimes it is MDC and other conte
Wayne, The most likely issue is that you need to feed audio from your sound card Line Out to the Patch input on the FT1000mp. You can not use the same AFSK pin on the Packet connector. It is cut off
Don Hill and other 2 computer users, I just got two computers networked running a radio each. But -- Radio A and its computer log had 8 contacts in it. Radio T when I was checking out the FSK I made
Scot, Don, et al Thanks. I decided that since that behavior was so unexpected that I would just restore the logs to the condition I started with and re-run the experiment. And of course, it worked pe