I went to create a new log for the VOLTA RTTY contest and could not find a Template for it? I found my an old one from 2011. I am going to use it, But was this deleted? What name is it under? A.VOLTA
Sorry for taking up the band width with my problems, but I downloaded and tried to install WLCM_SM6SRW_050220.EXE and WLCM_DL1EFD_080414.EXE but I get the following error message: "Fail to self-regis
Thanks to all for the help. Running the Legacy Installer Helper did the trick. I should have know, I been a WL user for 15 years I think. K0BX -- Honor Roll RTTY 5BDXCC Plus 30,17,12 5BWAS Stop the i
Go to View on title bar and then select "title bar". Joe K0BX -- Honor Roll RTTY 5BDXCC Plus 30,17,12 5BWAS Stop the insanity! Please do not add me to any distribution lists (Joke, Stories or Junk) w
I own a Flex 6300. I have been a Writelog (WL) User for a very longtime. I use WL as my on-line log both in and out of contests. I then upload the logs into DXbase. Here is my question. I have been l
Hello to all. Well I got the WlFlex Lib 11.27 up and running now. Seems to communicate with the Flex very well. I do have a few probems: To run MMTTY Plug in and get the PTT to work, I do have to run
Hello again, after playing with WlFlex Lib 11.27 I have decided that it wasn't what I needed. It worked fine for CW and SSB but for RTTY it was a big step backwards. The only advantage over using DAX
I am having a problem with the WlFlex control. I go into a "Split" operation and get an A and a B Slice, I highlight the TX on the B slice and click the Flag for the B slice to make it active, BUT wh
Chuck, I see that you are using USB=>Serial Converters. I have had problems with these in the past and one little trick I have used is as follows: Using NotePad edit writelog.ini as follows: In the f
Add a shortcut key with the following: HOME=EntryGotoNextStnUpBandmap END=EntryGotoNextStnDownBandmap I usually have to have the number lock turned off Joe K0BX Honor Roll RTTY 5BDXCC Plus 30,17,12 5
Hi and thank you for adding a true RTTY Mode to the Flex 6XXX series. I works just fine. But I use Writelog and it hasn't caught up yet. When I change the mode to RTTY on the Flex Flag, Writelog will
Keith, I suggest that you connect to dxspots.com in the telnet window and make sure that DXTelnet isn't the cause of your problem. Joe K0BX Honor Roll RTTY 5BDXCC Plus 30,17,12 5BWAS Stop the insanit
Keith, glad to hear you are on the right track now. I tried to get DXtelnet to work, but it was so old it would not work on my new PC. The is a very good telnet software called VE7CC. It runs as a st
Right click the panadapter, menu will popup, you can turn off the panadapter. Joe K0BX Honor Roll RTTY 5BDXCC Plus 30,17,12 5BWAS Stop the insanity! Please do not add me to any distribution lists (Jo
You goto the entry toolbar, select Radio > front Panel > Flex Slices A & B. If the audio control buttons are showing, you can hide them using the menu. They are only for touch screens. Joe K0BX Honor
Clay, go to Writelog.com and download and install the WLFLEX11.30b driver. It will work with any version of WL from 11.01 on. It has the RTTY Mode on it. Joe K0BX Honor Roll RTTY 5BDXCC Plus 30,17,12
I am using the new WLFLEXdriver for RTTY. Works well. But How can I run WL with MMTTY on one slice and another MMTTY on the other slice? I could do this with the DAX control, I do have two separate c
Never mind, I found it! Joe K0BX Honor Roll RTTY 5BDXCC Plus 30,17,12 5BWAS Stop the insanity! Please do not add me to any distribution lists (Joke, Stories or Junk) without my permission. __________
I am using WL with my Flex 6300. I am using the WLFLEXDriver1130b that Wayne wrote for the Flex. All was working fine until I upgraded to Windows10.' Everything still works after the upgrade but anyt
Yep, that is the way it has always been. Even other transceivers do the same. The mode comes with the packet spot. Writelog uses that. I guess if we used a template for a RTTY contest, then maybe WL