Hi Mark, I am not sure of the hookup on the PK-232DSP but on the older PK-232 there is a flat connector for audio and PTT. There is another connector, a round one that has the FSK output on it. So ma
You know all of this is good discussion. The USB does not support 5 level code so it will not work with the soundcard rtty and FSK. But also, for us older folks, if anyone is using WF1B or Writelog w
Good Idea, but dont think it will work. Do the following and see if it helps. If WriteLog will not communicate with your PK-232, it may be necessary to do the editing described below. Using NotePad e
Well Don, what do you call "Buy"? A beer at Dayton? I have a 15/20/40 meter coil for a SB-200 (Image that). That's the good news, bad news is that the 20 meter coil is used and I had to fix it once.
I am not sure of what you want to do,, but Writelog does exit out of host mode and back into command mode when the program exits. If you want to know how to exit out of Host mode on the PK-232, if yo
David, I do not know the commands for the KAM, but a while back there was a unpublished writelog.ini command that will put the tnc is CW instead of rtty. I have a webpage that will show you how do it
I also believe the 'Home' Key should stay as is. I use it all the time in the entry window to get to the beginning of the call. There are several add-in products that will allow you to re-map the key
This did not work on my Win98SE machine with Writelog. The AR User program works fine. I wonder if there is a problem since I am using a DSL/Router and maybe it is blocking the 127.0.0.1 address? Any
I want to thank all that responsed to my question concerning AR with Writelog. I have not got it to work yet. But since AR is working in a stand alone mode, and Writelog Telnet is working fine, then
Yesterday I wrote that AR and WL was not communicating. Today I have great news, All I had to do was to Check "Configuration>Ports>LocalNetwork>Telnet". It worked very well and is a very nice interfa
Hi Jim and the group, there is always a way to do something. If you want to get the name, address, state, grid square, and other information the easiest way to to get it from QRZ.Com. It is always ac
Our company radio club, Boeing Employees Radio Society (BEARS) STL, received 7 newer PC's (750 MHZ) to replace our 266 mhz pcs in our club station. They are pulls from the latest company upgrade. I w
Hard to say what you are not doing but I just setup 7 Win2000 machines from scratch all talking to each other in Writelog. If you are using a 'Hub' like I am, then you will need to setup IP addresses
Dennis, I am using a VScom PCI card with four com ports and an LPT with WL. I have computer control to the TS-850S on comport6 and rotor control on comport7. Comport5 is CW, Comport2 is ptt/fsk. The
The Kenwood TS-930 and TS-940 FSK was setup reversed to everyone else. You have to change the keying circuit around a bit or do it in MMTTY. I used this circuit to key my TS-850S for long time. I the
I guess there is many ways to do this. EZ way is to upload the files into a logging program and then export the all the records to a adi file. I did this with DXBASE. But if you are willing to go to