Gary, I use the US Interface Navigator with a Dell XPS-410 Vista computer, which like your laptop, has no COM or LPT ports. In fact, Vista does not support either of those port types. The Navigator h
You are all misinterpreting what command 1A, sub-command 0565 does. It does NOT clear RIT on the radio. What it does do is to read or set the "Quick RIT Clear Function" -- see page 103 of the IC756-P
Wayne, I use WriteLog successfully with the Icom IC-7600. There are two solutions to your problem: 1. Edit the CIV address of the IC-7600 in the "Others" menu (clear down near the bottom) in the 7600
Alan, See the official WriteLog "Third Party" page at: http://writelog.com/downloads/third-party The module by SM6SRW contains the UBA DX contest. Add-on modules may be installed with no effect on th
Ed, If you have kept your earlier upgrade install files, just find them, then start to re-install your latest update. In an early step, before you give the go-ahead to actually install the update, yo
Kari, Open the Setup menu, then choose "Ports...". In the dialog that comes up, use the left-right arrows in the top right corner to scroll to the right until you can see the tab "CW Speeds". Select
I am using version 12.27C. This has always worked, at least in versions before 12. However, in fooling around with WriteLog starting and stopping it I have discovered why it doesnt work for you: the
I have just generated the NAQP prefill ADI file for WriteLog and posted it at my club website: http://www.eidxa.org/images/NAQP_CW_Prefill_2018-08-01.zip This is a zip file containing the .adi file.
The link to the Eastern Iowa DX Association home page below was busted. It should be: http://www.eidxa.org (It had an extraneous slash at the end.) 73, Craig, KØCF I have just generated the NAQP pref
I have just generated an NAQP SSB prefill ADIF file for WriteLog and posted it to my club website, the Eastern Iowa DX Association home page at www.eidxa.org. From the home page, click the "DX Resour
I have just generated a CQWW RTTY prefill ADIF file for WriteLog and posted it to my club website, the Eastern Iowa DX Association home page at http://www.eidxa.org. From the home page, click the "DX
In my previous post, either my email client or the reflector managed to mangle the URL for EIDXA. Here is a corrected version that I have tested and seems to work. Sorry about that! I have just gener
I have just updated the CQWW RTTY ADIF prefill file for WriteLog and posted it to my club website, the Eastern Iowa DX Association home page at < www.eidxa.org >. From the home page, click the "DX Re
This is usually caused by the vagaries of Windows timing. The cure is to not rely on Windows for CW timing by using a separate K1EL WinKeyer USB. This will go on its own USB port, and creates a virtu
I have just created the ARRL 160 Meter ADIF prefill file for WriteLog and posted it to my club website, the Eastern Iowa DX Association home page at < www.eidxa.org <http://www.eidxa.org> >. From the
I have just created the ARRL 10 Meter ADIF prefill file for WriteLog and posted it to my club website, the Eastern Iowa DX Association home page at < www.eidxa.org >. From the home page, click the "D
I have just created a Stew Perry 160 Meter ADIF prefill file for WriteLog and posted it to my club website, the Eastern Iowa DX Association home page at < www.eidxa.org >. From the home page, click t
I have just updated the Stew Perry 160 Meter ADIF prefill file for WriteLog and posted it to my club website, the Eastern Iowa DX Association home page at < www.eidxa.org >. From the home page, click
I have just created an ARRL RTTY Roundup ADIF prefill file for WriteLog and posted it to my club website, the Eastern Iowa DX Association home page at < www.eidxa.org >. From the home page, click the
I have just created an NAQP CW ADIF prefill file for WriteLog and posted it to my club website, the Eastern Iowa DX Association home page at < www.eidxa.org top left side of the home page. The prefil