HELP !!! VHF Contest is only 1-1/2 days away and I can't get my IC-9700 to stay connected to Writelog. I had version 12.6 and it wouldn't work, so I purchased the latest (v12.66) and it still don't w
The later versions of Writelog do not have/use an INI file. This is disappointing for me. I've used Writelog since back pre-version 8. I love how it handles multiple rig inputs for VHF contests. Ther
Thanks for the comments. They have been helpful. I've managed to get the IC-9700 to stay connected by hooking it direct to the computer and not through my USB Hub. Odd that the IC-9700 works well wit
Total frustration with this issue. Every time I close Writelog, on restart and opening an existing contest log I have to reenter all of the setup information, including ports. YES, I have saved the c
Help !!! I think I found a bug in v 12.68H I?m setting up Writelog for the VHF Sweepstakes this weekend and I can?t get Digirite to work from the Radio #3 Log Entry window. I normally use 3 or mor
I just completed the update to Writelog v12.69 and the same issue exists. I am not able to get Digirite to work from the Radio 3 entry window. BTW -- Just in case it affects the issue this is when us
I have Writelog set up to used Digirite for FT8 contacts during the VHF contest. I'd like to be able to log MSK as well without doing a manual cut & paste. Is there a way to broadcast the WSJT-X cont
I like and use Writelog specifically because when VHF/UHF contesting because I can connect more than 3 rigs at once to the logging program. But digital modes in addition to FT8 (MSK, JT65, Q65) are b
Digirite is NOT an option for WSJT-X. Not only is it very difficult to use, It does not do any of the other modes used for VHF-UHF contesting and have very crude display setting/options. The only adv
How do you go about submitting to have an update made to Writelog? I've been using Writelog for more years that I can count. I use it almost exclusively for VHF contesting. I like many other VHF cont
Trying to set up OmniRig 2.1 for 4 rigs for the VHF contest this weekend. Under the "Port Setup" I set four OmniRig 2.1 Rig types, as Rig #1, Rig #2, Rig #3, & Rig #4. When I try to map each of them
I don't know what I've done to cause this , but I cannot get Writelog to open/run. This is the second time today I have had this issue so I think something else may be causing the problem. To resolve
Problem is related to which of the 3 large screen displays I open the program in. I'm not sure why it does it, but I have figured out how to make it work. de K3SK I don't know what I've done to cause
I have never been as frustrated with a program as much as I have been with Writelog this past week. I have used it for years contesting and have never had the issues I'm seeing now. Everything worked
The only solution that worked was deleting the latest UDP release and run the same older version (v8 ??) that I ran for the June contest. That worked fine. de K3SK I suggest log out of Windows and ba
Alan, Thanks for the input. I will give it a serious look next chance I get. WL is a complex program and there is always something new I didnt know it could do. de K3SK From: Alan Maenchen <ad6e@arrl
Where is the writelog ini file and how do I edit or setup transverter offsets? de K3SK Dave Buckwalter FM07 - Farmville VA _______________________________________________ WriteLog mailing list WriteL
Thanks everyone. I found the information for setting offsets and that part appears to be working. However, When a contact is logged from the transverter connected comm port (HF rig IF), it logs as "o
Mike, (and any others that can help) I've done all of that and I can get the QSO logged with the correct frequency, but it is flagged as "out of band" and scoring does not include these contacts. See
The contest is the ARRL VHF Sweepstakes. Starts tomorrow at 1900 Z. Log line 1 is FT-2000 on 50MHz Log line 2 is IC-9700 for 2m or 432 or 1296 Log line 3 is 2nd IC-9700 for 432 or 1296 Log Line 4 is