May not be Writelog itself sending the tone. What happens here is that Writelog keys a port on startup and what is happening is it keys the rig itself. Therefore the tone is the rig's sidetone monito
I saw exactly the same issue as described below. Also using the latest version. Keith W3KB --Original Message-- From: WriteLog <writelog-bounces@contesting.com> On Behalf Of Steve Nordahl via WriteLo
Bob WA1FCN I use a Yaesu FT DX 5000 and have just tested the two band maps set up on it. In Writelog, to call up the second band map go to the Entry window, right click and there are two listings: Ba
This is what I use on my FTDX5000: I have the Port (Com 3) itself set to 38400 Baud and 8N2. Note: 8N2 not 8N1. Set port speed on rig to 38,400. CAT RTS (Menu 34 is Enabled) CAT TOT (Menu 33 is 10ms)
Jamie NS3T Just wanted you to know I had the same issue. I used the NC7J and W3LPL RBN nodes during the contest. I also got random "Disconnected" notices from each node. In other words they (NC7J and
Monitoring works just fine here on my FTDX 5000 on RTTY. The difference may be that I use FSK keying not AFSK. The volume controlled by the Monitor knob sounds very good. Keith W3KB FTdx5000 monitor
Mine is a homebrew RTTY interface. Have had it for years on several rigs. Don't know what else to tell you. The audio level using the Monitor volume control on the rig sounds fine here. You must have
In your list of Windows programs, look at Writelog and then Sound Board Mixer Control to make sure you have the right audio system connected for input and output. In Windows Settings on your computer
Folks....this is a BOGUS Phishing type email. Do NOT click the links etc. I deleted the email from my inbox.....I suggest all do the same. Keith W3KB Really? Thanks 73 Jim W7RY On 1/28/2021 10:18 AM,
Upgraded to Version 12.56c and used it in the CQ WW 160 CW contest. * Add option to put PTT on RTS of rig COM port with TX focus. * CW PTT is now either on or off (which is QSK), which deprecates the
Running the latest March 2021 Version 12.58B software. While in the Entry window or the Band Map, the mouse wheel no longer is adjusting (fine tuning) the frequency. Yes, the [Configuration] MOUSE_WH
Looks like I may have solved the problem. It was a Com Port - Stop Bit issue. I have three programs that use CAT control.....Writelog, DX4WIN and WSJT-X. My overall Com 3 port used for CAT control wa
Is it possible you have the dial "locked" on the rig itself? Unlock it, if it is. I had that happen to me before. Keith W3KB I am having some trouble setting up the rig control for a FT-891 using Wri
Jim: Bring up the Band Map. Right click in the Entry window and bring it up. Just the Band Map only and not Band Map on 2nd VFO Let us know if the Band Map frequency display changes as you dial the V
Understand. That means it is not working. The Band Map should be showing the frequencies of the rig for the band it is set on such as 7025 (Not 0). You have the ability to enter a frequency in the En
Greatly appreciated Bud. Just loaded it here and ready to go. Keith W3KB The subject file is available at: https://paqso.org/--party-plans-and-aids.html Scroll down to the bottom of the page for the
Used DigiRite stable version 2.2.2.11 and Writelog 12.61E in the contest. Worked very well here. Agree with the comment: "A really really nice tool for contesting!" Keith W3KB Keith Beebe W3KB Past P
Rich: This has been corrected. This is NOT a Writelog or Contest Module issue. The issue was VO1CH in Newfoundland was signing NL (which is a Section)....he should have been signing NF as the Canadia
Steve and Wayne: Outstanding !....thank you for the ARRL Digi contest module. I am all set up here with the new module. Will be on FT8 and FT4 only. NOTE: the suggested frequencies for FT8 and FT4 in
With the ARRL International Digital Contest module just released for Writelog this would be a great opportunity to test things out: There are two practice sessions for the Contest: Session #1: Friday