We did the WL set up on a recent DX/CAPQ/PAQP operation from the Virgin Islands as follows: 1. We had one computer running XP and the rest Win98. The XP computer is required that a user account be se
I am trying to get set up for today's NAQP RTTY to operate SO2R. I do not have the W5XD interface. Setup: Computer: Windows XP, Byterunner 4 port card for additional serial ports. Left radio: 756PRO2
I am having trouble getting Writelog to control the frequency for two radios. The radios are (L) IC-756PRO2 and (R) IC-756PRO. The (L) PRO2 is connected via the MK-1100 to a RigBlaster PRO on com1. T
TROUBLE FOUND! Real men don't need help files eh? I found the my problem. The frequency/mode button beside the log entry window has a pull down menu "Log the frequency of QSOs". I only had to select
I am not so sure it is scoring right. I changed the writelog.ini line CallPrefix=W4ZE/3 to add the /3 for this contest. This got it to score the 3rd call area as 5 points, but it is scoring other US
I get a worrisome random character at the beginning of each transmission using the MMTTY add on. Does anyone have any ideas of how to stop it? My guess is that I don?t have something set up correctly
The link to http://www.af4z.com/ham/ does not seem to work. Anyone know of a source for the latest friend.ini file? Ted Huf W4ZE 724-873-5050 Hickory, PA www.w4ze.com ted@w4ze.com ___________________
The UK DX RTTY module does not highlight the Rttyrite window call signs. Anyone else notice this or is it just me? Ted Huf W4ZE 724-873-5050 Hickory, PA www.w4ze.com ted@w4ze.com ____________________
Thanks Jerry, The highlights work if I open a clone receive only window of Rttytite, put only on the clone window. Only problem is that you can not see what you are sending in the clone window so you
I used 10.56C in the TARA RTTY contest and had no problem with the NO RIG. This was very prevalent before. The setup is IC-756 PRO3 and microHam micro Keyer (ver 3.0.2.903 firmware 02.05). I have the
Using WL 10.57H in NAQP with IC756PRO3 and microKeyer. Started having the com port to the radio drop out. The bandmap does not move nor the button where you set the frequency. Checking the microKeyer
This did not start until I had over about 100 QSO. I now notice that it will come back after about a minute or so. Also if I log a contact, it seem to come back right away. The problem is mostly that
Using a PRO3 but tell WL it is a PRO. Have the CI-V address set to PRO (5CH). --Original Message-- From: writelog-bounces@contesting.com [mailto:writelog-bounces@contesting.com]On Behalf Of ..::Lars
Does any know if the Writelog will send PTT commands to the IC-756 Pro 1/2/3 on the control port? In the manual of my Pro 3 I find the following description for command 1C00 and 1C01: (Set the transc
I am trying to set up Writelog for SO2R RTTY. I have success so far with all be the alternating timed CQ. It seems that once I start the CQ on rig L, I can not start it on R and make it alternate. Is
Thanks for those who responded. The consensus is that dueling CQ do not work. Hopefully, it will in a future release. I am trying to set up Writelog for SO2R RTTY. I have success so far with all be t
I have a 4 call and but live in 3 land. Many RTTY contest that use call district multipliers require you to sign portable for example W4ZE/3 if you are out of your call district. If someone sends my
Has there been any thought about a new PSK module for Writelog? One with a waterfall would be nice. Perhaps PSKCore.dll by AE4JY that is used by DX4WIN or MMVARI by JE3HHT that is used by N1MMlogger.
I am presently running 10.60G. I downloaded wl1061emsiugp.exe and ran it as directed. During the install I get the following message: Source file not found: C:\DOCUM..\TEMP\wlfull01.cab Verify that t
I fixed it. I went back are loaded the last full version then the upgrade. All is okay. _____ From: Ted Huf W4ZE [mailto:ted@w4ze.com] Sent: Saturday, September 30, 2006 11:37 AM To: 'writelog@contes