This did not start until I had over about 100 QSO. I now notice that it
will come back after about a minute or so. Also if I log a contact, it seem
to come back right away. The problem is mostly that the bandmap does not
follow the tuning knob.
-----Original Message-----
From: writelog-bounces@contesting.com
[mailto:writelog-bounces@contesting.com]On Behalf Of Ted Huf W4ZE
Sent: Saturday, January 14, 2006 8:05 PM
To: 'WriteLog Reflector'
Subject: [WriteLog] Com Port Drop Out
Using WL 10.57H in NAQP with IC756PRO3 and microKeyer. Started having the
com port to the radio drop out. The bandmap does not move nor the button
where you set the frequency. Checking the microKeyer control panel I can
see that it is working. Nothing I can do with in the program like go to
setup/ports and hit ok works like it used to. The only way to get it back
is to end the WL and restart it. Anyone else having this problem?
I had this problem a couple of versions ago, but it seems to be back now.
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
_______________________________________________
WriteLog mailing list
WriteLog@contesting.com
http://lists.contesting.com/mailman/listinfo/writelog
WriteLog on the web: http://www.writelog.com/
|