Longpath? -- Barry Kutner, W2UP Internet: w2up@mindspring.com Newtown, PA Frankford Radio Club _______________________________________________ RTTY mailing list RTTY@contesting.com http://lists.conte
IMO, a real dumb choice. It will get as much use as semicolon and parentheses :.) What was wrong with "didah dah?" It's a shorter character, and won't cause the confusion a new character will cause.
I never had good luck with optoisolators on my Yaesu gear. I swapped then out for 2N2222 or equiv. transistors. Simple circuit - 1Kohm resistor on base, emitter grounded, output from collector. Barry
John, 48K RAM? That's about what my Commodore 64 had :.) Back to the original question: My bet is on the RAM. I ran WL on a P60 (Win98 FE) for quite a while on my second computer with 128 Meg RAM wit
It's been several years since I operated WAE with WL (CW). Besides the F-key message buffers, is there anything contest-specific I need to configure for this one, such as QTC-related stuff? I just in
First the big report: Playing in WAE. I have 9=N and 0=T set in the CUt Numbers section of writelog.ini. The cut numbers don't work for QTCs for the most part. Leading zeros in the serial number are
Go to writelog.ini, and look for something like this: [Recent File List] File1=C:\ham\Logs\wae04cw.wl File2=C:\ham\Logs\ww03cw.wl File3=C:\ham\Logs\NA-Sprint-RTTY-3-04.wl File4=C:\ham\Logs\arrl04ph.w
I installed SP2 on 3 computers at home about 2 weeks ago. NO problems until yesterday: 1. My daughters computer locked up solid for no reason. No mouse movement. CTL-ALT-DEL didn't work. Manually shu
Took me a little while to figure out why the little box to enter the telnet address for the Cluster wouldn't work in the WAE this weekend. It opened BEHIND the main logging window. I minimized the ma
It's disappointing that with the 20+ messages about this in the last week, neither Wayne nor Ron have taken the 60 seconds needed to address the problem, or at least say it's being fixed in the next
Hi all, Was setting up WL 10.48F for CQWW Phone. Seems I am unable to network the two computers. Only change I can think of, since last running 2 computers with WL, is updating computer 1 to XP SP2.
Reviewing the network setup for XP, I ran netsetupnt.exe and got this: C:\ham\Programs>netsetupnt System error 1058 has occurred. The service cannot be started, either because it is disabled or becau
Thought I'd post a follow-up to yesterday's problem with networking my 2 computers for Writelog (one running XP and the other Win98.) The network functioned fine for print and file sharing, however,
Does anyone know if CW decode and audio record will work together as they both use the sound card? Tnx, Barry-- Barry Kutner, W2UP Internet: w2up@mindspring.com Newtown, PA Frankford Radio Club _____
I agree with Bob. After the SSB test, I set up for CQWW CW. It wasn't totally from scratch as I copied my Window layout and message buffers from last year's contest log, but still required a bit of w
I never tried WL while SP2 was installed on my system, but after lots of problems and about 3 hours on the phone with Microsoft tech support. We would up uninstalling SP2. Seems a lot of programs and
New problem this weekend. When trying to link 2 computers, a little box pops up "Server busy Switch, To, Retry, Cancel." Try the options, WL crashes. Ideas? Tnx, Barry-- Barry Kutner, W2UP Internet:
I should have metioned I'm running 10.48 w/netdde networking. Barry -- Barry Kutner, W2UP Internet: w2up@mindspring.com Newtown, PA Frankford Radio Club ______________________________________________
Besides needing to hit ESC to end xmsn when sending a single QTC, I noticed that if I had to send more than one individual QTC with ALT+number, the radio did not key for the second (or more) QTC. Bar
Thanks for the tip. I never knew that was available. I haven't tried it yet, but I presume MMTTY_ALWAYS_ON_TOP=0 accomplishes the same thing for MMTTY RTTY in WL. 73, Barry -- Barry Kutner, W2UP Inte