Has anyone tried the Heil Traveler headphone/boom mic on the ft-100d? And if so, how do u like it? Bob, KZ2G -- 10-10 # 10148 -- Omni 6 Plus (Base) & FT-100D (Wheelchair Mobile), C U on CW! See my Ha
Anybody know the particulars of the mod for the FT-ONE to change fan to xmit only operation. Called the "FAN-ONE" mod according to the QST review. The fan in mine runs all the time and it is a loud s
Recently I purchased an old Yaesu FT-747GX made in January 1991 for mobile use. For the past two days I've been trying to make my LA-1000A linear amplifier work with the FT-747GX but to no avail. The
Hi Alex, In regards to your digital display: Output from the FT-101 VFO can be taken at either pin #6 or #7 of the VFO output (Octal) output socket. I'd recommend you become more intimate with the tr
Rick, your processor sounds to me like it's operating properly. How's it working out for you now that you have had a chance to run it a while? Regards Carol W4CLM
Hi, I'm not sure where I came into this email thread, but I can vouch for the Almos All Digital Electronics digital display. I've had one on my FT-101E for 2 years now. I made the kit and put it into
To follow up on my previous post. The AADE DFD-3 model is programmable for your particular radio. In my case, I programmed in the FT-101. The until then handles all the frequencies for each band. It
Does the FT-757GX have any overload type fuse on the recv. end ? My revc is WAY down a normal 60 over S9 is S3-4 and unless your 60 over I don't hear you , after a local ham keyed up with 1500 watts
I think you may be on the right track. Several older Yaesu transceivers I owned or have worked on had miniature 'grain of wheat' pilot lamps in series to act as fuses and spare the primary winding on
I belive Dave hit the nail on the head (David K3KY) The Ft-757Gx uses a grain of wheat lamp fuse in the front end and the lamp you are looking for is located onthe main RF unit (FD1) F1001 The Yaesu
Problem fixed. I located the *bulb* ands when shorted across the leads I can hear again. Now to find a replacement. Thanks for all the guys who answered my request for help. Dave David L. Vondrasek N
Davis_R" <WD8JJA@arrl.net> writes: So it seems. Do you know why or how it doesn't do anything on AM? I have looked pretty hard at the schematic, and for the life of me, I can't figure out how it gets
Hello Has anyone heard rumors about how Yaesu will be handling the new 60 M band on the MP-1000 family? I wonder if it will be as easy as a firmware upgrade.... 73s de Jon AD6FX
Hi Carol, Thanks for the reply. I know of the G3LLL processor from reading the FT newsletters, too. It WAS in the circuit during receive, as well as transmit. In some of the comparisons, this was the
Hi I wonder if anyone can help me with the following problem I have encountered . I use a FT847, with CAT to YP and N1MM logging software. It has worked fine since I got the rig, but last week I inst
Dave, don't leave it with a short across the old lamp. It was there for a reason and what ever took out the lamp could well take out the front end amplifier if it should happen again. Make sure you p
Hey gang, I just thought for what it's worth, I would pass this along to you.. Having traveled extensively to Japan on business for about 10 years, I thought I would try my hand at a little Japanese
Most interesting, but what i stare at are ALL GREY boxes and they habla solo ENGLISH I.E. COLLINS for me still the BEST FOR MY CW ONLY KWM2AS, 32S3 AND 51S-1S THE CLASSICS!! ARE WHAT I LOVE 73 DE JOE
Author: federico_baldi@yahoo.com.ar (Federico J. Baldi)
Date: Wed May 21 23:50:26 2003
Hi group, I have a ft-747gx and it's moving on frequency, porperly "dancing". The dial don't show it. I noticed that it occurs when the power supply outputs 14.5 Volts. Is it a casuality or someone e