I don't run CTWin, but I know of at least one limitation. It doesn't support the DVP card. So if you are using that, you will still need to run the DOS version. Win98SE is a reasonable way to go, alt
I have used CTWin and CTDos (same CT version) with a CT serial port network without problems in several contests during the last two contest seasons. One computer ran CTWin with WinME and the others
You CANNOT mix the loop option with Ethernet. The loop option essentially breaks the serial port into two single direction ports. The data comes in on the Rx line from one station and out on the Tx l
Okay, that is great. Back about three years ago before I went to J3A, I talked with K1EA about doing this, as I was trying to set up our network and had some laptops with only one serial port, mixed
First, this is a list of users and one can not usually expect a reply from K1EA on the list. The latest version of CT is now at 9.90, which can be downloaded from www.k1ea.com . The DOS download file
Yes, it was working to a limited extent a two or three of years ago when I had my 847. CONFIDENTIALITY NOTICE: This message is a PRIVATE communication. This email may contain privileged and confident
Not sure of your problem, but do you have a MULTI.CFG file on each computer that identifies all the different stations and did you set up each computer to be a different station? CONFIDENTIALITY NOTI
I used version 9.89 with a MarkIIG recently without any problems. Haven't had time to check out the latest version. CONFIDENTIALITY NOTICE: This message is a PRIVATE communication. This email may con
Most radios with built in keyers operating in no keyer mode still require a stereo plug with the keying line connected to the tip and nothing connected to the other line. Ground of course to the shie
Later Icoms, such as the 756 series, have two CW inputs, one for the internal keyer (using a paddle) and one for a straight key, external keyer or computer keying. Unless you somehow internally modif
Don't even connect it to the radio to test. Type SOUND to turn on the PC speaker and you will get sidetone from the PC. That way you can check out your computer setup regardless of the radio. CONFIDE
First, have you filled out a bug report at www.k1ea.com? Second, from the fact that three of the radio control functions TO the radio don't work, I would think that there is something wrong with your
It is not required by the rules but to be accurate I would like to know what type of Q it is. My reasons include, knowing what the distribution of FM vs. SSB vs. CW Q's in the contest. I think someon
I think you mean 9.83 Yes, I got that too. I used another version of CT to enter the first QSO, after that I could use 9.83. But then again, just use a previous version. Seems like there is a bug in
Well, I didn't work either AK or HI in the contest, but I did try to change an entry to HI and it worked just fine. I just created a dummy log and could log either AK or HI without a problem. Do you