I have a Ten Tec Corsair II and an OMNI V. They do all I need and more. Both rigs have all the filters. DSP units are on both made by Timewave. The Jupiter and Orion are great rigs if you like to loa
Have a Corsair II that seems to be developing a problem, I think. Seems that if rig is turned off for a day or so I get very low s-meter readings and low signal levels. If I switch the mode switch fr
Kip, about five years ago I bought a Corsair II. It was my second back up rig. I paid $475.00 with one SSB filter included. They hold value very well and I would think $450.00 should get you a good o
I don't know what city you are in but here in Tampa, FL I had the same company make me a quart of Heathkit green for an SB-401 I restored. They gave me a perfect match in color and gloss and it was f
Has anyone in the group had success in setting up an EchoLink connection using a wireless card on a laptop. If anyone is an expert Elmer please reply direct to Dan at: _otakebi@aol.com_ (mailto:otake
Anyone know what happened to the website? I have been unable to get on in two days. Is it off the web? Dan/N4VET _______________________________________________ TenTec mailing list TenTec@contesting.
Mike, it is a good thing you asked about the battery. I have a Turner M+2/U that I bought new many years ago. I buy the battery for it at a local CB shop here in Tampa, FL. The name of the place is J
I found a Shure 450 and would like to hook it up to my OMNI V. It came with no spec. sheet or documentation. Wires in original cable are red, white, green and black and shield. It looks like White is
Thanks to all who replied. I found information on Shure web site but need more information. Seems from what I can get from the web site that the color code is as follows: White = mic Green = ground S
I got a hold of a data sheet on the Shure web page. Wired it up this way from the information provided. White cable lead which is hot conductor for mic to pin #1 of Corsair. Green lead (ground) and s
Thanks to all who responded to my help request. Thanks to all of you the Shure is now working great. I guess that why this list works so well. Dan/N4VET ______________________________________________
I think that the market will determine the fate of Ten Tecs company. If enough people buy the product and are happy with it all will be well. I am sure that Ten Tec would love to build a top of the l
Carl, how did you do it. The rest of us Corsair Ii owners would love the information on the repair. Thank, Dan/N4VET _______________________________________________ TenTec mailing list TenTec@contest
If you are going to keep the rig send it to Ten Tec. They will check it out for you and fix it back to factory specs. This should be done anyway unless you have a lot of test equipment and have the a
Call TT in the morning and they will send you a new crystal it will probably be no charge. You might even want to send in the whole thing for an exchange. It is degraded and you will notice a differe
I am getting bad signal reports on my Corsair II. Was told of a staccato sound to the transmit audio signal. I thought of RF or mic problems. I used another rig to listen to the transmit signals and
Same here Gary. I have a Corsair II and find it stops its drift after 20 minutes. Best radio I have even though I have others. It can hear what they can't And, the value keeps going up. Dan/N4VET ___
After watching this string for a few days I recall that when the Orion II came out everyone was having a fit as to why Ten Tec kept it such a secret. Can You blame them? This thing is not even off th
Last I checked TT had all the knobs for the Corsair II. When did this happen? Did you ask for just the insert or the knob? I ordered 4 and a bandswitch knob and they came in as ordered. Same knobs ar