Have a Corsair II that seems to be developing a problem, I think.
Seems that if rig is turned off for a day or so I get very low s-meter
readings and low signal levels.
If I switch the mode switch from ssb to cw and back signal levels come up to
normal and so does the s-meter.
When I switch from ssb to cw I hear a relay click but only one time.
If I turn the rig off and on after the fix the problem does not happen again
unless the rig stays off overnight.
Any ideas before I dig in and try to see what is going on from anyone who
has had the problem and fixed it?
Thank ahead of time,
Dan/N4VET
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|