John, Does the CAT work from the computer you are using to the Orion? If not, I suggest you check that it does before going back to the update. Bob G3ORY an RS232-USB I've MODE" any key _____________
Hello Ted, The connector for the Orion 1 (and the Orion 2 is probably the same) is by TE Connectivity (successor company to Amp). The plastic housing is TE part number 1-640523-0 The crimp receptacle
Paul, One of probably several possibilities is the TX loop. Check the status in the menus and make sure it is OFF. 73 Bob G3ORY When I I function _______________________________________________ TenTe
Paul, If you are really stuck here you might be able to work backwards to find out the answer. This only applies to ladder filters but there is an excellent design program by G3UUR on the Warrington
Tony, Untrue. As someone sitting at my computer in England I can assure you that today we are using GMT. GMT is 'zulu' time in military parlance and is the same time as UTC. Tomorrow we will have cha
Guys, I am having an intermittent problem with my 565 Orion. It looks as if one of the antenna relays is intermittent. The schematic gives the part number as SN1A12A I am having trouble sourcing one
Guys, I have been trying to contact Jack for some time now (since late September). He did mail me to say that he was taking a bit of a break but hoped to be active again at the beginning of November.
Hello Rafael, I did wonder if Jack was having health problems. I really hope he comes through this. Please keep me posted. 73 Bob G3ORY 25/12/2015 21:11 Labs buffer amp i.f. output mod in Eagle? heal
Rick, Let me see, what is the date today....! 73 Bob G3ORY Original Message-- [TenTec] OT: New Bleeding-Edge Antenna Technology this year has enabled us to be active over the Winter have developed a
Hello Mike, I had exactly this problem with my O1. I replaced the reed relay which I think you have identified but it made no difference. I finally got my brain working a bit better and tracked the f