Paul,
One of probably several possibilities is the TX loop. Check the
status in the menus and make sure it is OFF.
73 Bob
G3ORY
>----Original Message----
>From: wg0g@arrl.net
>Date: 30/06/2014 0:32
>To: <tentec@contesting.com>
>Subj: [TenTec] Orion not TXing
>
>I need some help.
>I have an Orion, 565. Turned it on today and RX working FB.
When I
>tried to transmit, no power out, ALC light or meter movement while
>transmitting.
>I can RX on any band, the voice recorder works and I can hear it when
I
>key with mic or send 1,2,&3
>I get the same problem on A and B VFO's all controls work and
function
>as they should............but I am not getting any power out or
>indication of power out. The SWR reads 1.01 when I try to TX.
>
>Any ideas?
>Thanks!
>
>Paul, WG0G
>
>_______________________________________________
>TenTec mailing list
>TenTec@contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|