Good Lord!... I'm ready to go back to v4.31 Here is another serious problem I've found: - One of my Base Stations started ignoring it's static routes after upgrading to v4.43k. Although the routes we
Hi Kevin, I will be at Karlnet's office for a meeting this Friday at 9:00am. Don't know how much time I will have to spare after the meeting but I wouldn't mind meeting you if you're around.
Problems with v4.43k firmware: being run shows up in list of test partners. eg. A base station with a single PC card can do a link test with it's self. being run shows other base stations that are op
See what happens to an AP-1000 when it gets hit by a direct strike. https://carroll.pathcom.ca/serials/photos/AP1000_lightning.JPG Yep, the replacement AP does have a polyphaser on it.
Those are the Agere OEM cards that don't come with an integrated antenna, instead there are 2 antenna connectors The connector on the left is for RX/TX and the connector on the right is for RX only.
Ha Ha Ha!!! That makes me laugh. I am going to be very careful with local upgrading let alone remote... Kevin, Can you give us a quick list of tested configurations so that we know what we're venturi
Depends if you want to use sector antennas or an omni. Sector antennas are generally 4x the price of an omni antenna. Just the base station hardware +turbocell firmware + 2 radio cards will cost appr
Hi Brett, Pick up a freeware package called NeTraMet & NeMaC which are RTF collector & manager programs. They are open source packages that will allow you to get the information you are looking for o
Anyone using RADIUS with RG-1x00's? Anyone know why the RG-1100 only requests authentication for a wireless client once? ( if the client is rejected the RG-1100 doesn't seem to ever make another requ
I figured out one problem.. I was using an older configurator. v4.43k provides more options. Reading through the config.chm file I found a reference to WARP - Is this feature available now? Anyone us
TurboCell or Wi-Fi ? Don't buy Karlnet software for RG-1100 if you are going to use Wi-Fi unless: - you need RADIUS support - you want to prevent communication between wireless clients. ** REPLY SEPA
When you say "signal degrades" 10dB what do you mean? Where are you measuring this "degredation" and what are you mesuring it with? Do you have a spectrum analyzer? If not, rent one and look at your
Viper Car alarms use 2.4GHz but the spectrum they use is fairly narrow. I have an older 2.4GHz Panasonic Giga-Range phone manufactured back in 1999 that is horrible for interference... - it transmit
With the tools you have, are you seeing a decrease in received signal at the satellite? Or.. Are you seeing an increase in the noise level at the base station or satellite station? I still recommend