On 2003-Jul-09 at 4:39 PM Chris Conn wrote:
>4.43K may cause some problems for some people (I don't recall any being
>specifically described in this list...), however I as well as a number of
Problems with v4.43k firmware:
1> Wireless Link Test: the base station from which the wireless link test is
being run shows up in list of test partners. eg. A base station with a single
PC card can do a link test with it's self.
2> Wireless Link Test: the base station from which a wireless link test is
being run shows other base stations that are operating on different channels
with different NWID's. eg. Base1 can do a link test with Base2 even though
Base1 is on Ch:1 & NWID:1 and Base2 is on Ch:6 & NWID:6
3> Uploading 4.43k sometimes forgets static routes. Even though the route
still shows up under "Setup", "IP Router", the route is missing from "Monitor",
"IP Route".
4> A base station with 4.43k continuously (twice per second) sends SNMP trap
messages to any defined trap logger. Messages are "Link Up" and "Link Down"
5> Tertiary firmware fails to load on some cards with 8.10 and 8.72 firmware.
I guess the question of up/downgrading is a matter of what problem you are
trying to solve. I don't like trading a solution for a new problem or problems
so I've downgraded back to 4.31 everywhere.
|