We just finished setting up a new base station on friday. Over the weekend, my SNMP trap logger was filled with Link Up, Link Down, Link UP, Link Down ... messages from the new base station. These me
It would be nice if CPE prices were lower. My $.02 = Read a Book... namely "Mastering Guerrilla Marketing" by Jay Levinson. One of the insights offered is "Find your Niche Market" In your situation,
Have you looked through previous list messages because I've posted alot of details about Prism 2 cards in the last month or so. Some possible causes: - 802.11b Access Point Mode does not work with Pr
What Firmware did you upload to the AP-1000? I've only ever used SA-4400. Was the EnGenius card in the AP-1000 when you uploaded the firmware to the AP-1000? If so, upload the firmware without the En
Hi Nate, I am operating 13 BaseStation sites, AP-1000 w/ SA-4400 v4.31 providing service to a mixture of RG-1100 v4.27/v4.31 + Windows & Linux Clients. I have never seen the exact kind of problem you
Notice the "CE" certification at the end of the line? This is a card made for use in Europe. Are you somewhere in europe? If so, you probably won't be able to legally use the FCC certified 200mW card
This indicates is that the card comes in two versions... version 1 is 200mW, certified by the FCC for use in North America version 2 is 100mW, certified by the CE for use outside North America ** REP
I don't think that this will work for you. Windows VPN (PPtP) requires GRE (IP Protocol 47) to be forwarded to the host behind the firewall. Since there is no facility to forward specific protocols (
Probably not. Karlnet firware aimed at functioning as CPE equipment is limited to that function and little else. With SR-4100 you can program it to be a TurboCell Base Station but this will only allo
Kevin, Any chance that I could get a CVS of our license keys from the license-it.com database? We keep a database of all our equipment but we have only been recording Manufacturer, Serial Number & MA
For Windows, I think the name that is reported on link tests is the name of the computer. For Linux, the reported name can be specified in this line of the config.opts file: module "wavelan2_cs" opts
Here is a list of link test situations and what happens in each situation: card: ALL VALUES REPORTED. card: Local Levels NOT REPORTED. Remote Levels reported. Local Levels NOT REPORTED. Remote Levels
The last kernel version that I've been able to compile for is 2.4.9-18. I've been hacking the source code to try to get it to compile for later kernel versions but have been unsuccessful. I have pre-
Maybe if we got a database started of the flaky equipment Serial Numbers we might be able to figure something out. I will quickly throw an interface together and enter the Serial Numbers of our equip
Yes, the built in antenna on Orinoco cards receives alot of local signal from other sources (interference). I'm doing the same thing myself with the Prism 2.5 cards in some of our Base Stations. The