Anyone else annoyed by the lack of copy & paste ability in Configurator? Out of 260 RG-1100's I've managed to enter the wrong MAC address only a couple of times. Today, I did it again... Entered a 8
I just tried an EnGenius 200mW card with fimware version 1.5.6 which is the latest prism firmware that I know of and the wireless link test looks does provide believable values on both sides of the l
Charles, Are you ever going to tell us if the new boards work in 802.11b mode with Prism 2.5 cards or are you going to keep that secret to yourself? ** REPLY SEPARATOR **
I've also see this happen on every firmware release going back to the original COR/ROR firmware that Karlnet produced for Lucent. Rebooting the AP has always restored IP communication to the remote/c
This is freakin' hillarious... I am pinging an AP-1000 with Karlnet v4.31 SA-4400 firmware. The AP is in 802.11b access point mode. I'm pinging it from my laptop that has an Engenius 200mW card and t
Yeah, I should have thought of that. Speaking of firmware, do you have any idea why AP-1000's & RG-1100's appear to only be able to load the built-in 7.52 firmware into a Prism 2.5 card for TurboCell
Kevin, I also would like to know why my questions and reports to "techincal support" at Karlnet have gone unanswered. "Technical Support" at Karlnet thus far has been so pitiful that I gave up asking
I'm not 100% sure about this because I didn't design the firmware but my guess would be that when you set any Karlnet device to 1 or 2 Mbit/s you are locking in the available modulation techniques th
I just recieved the new boards and tried 802.11b compatible access point mode. It doesn't work with Prism 2.5 cards. Works with Orinoco Gold, Avaya Gold, Avaya Silver. ** REPLY SEPARATOR **
These cards are all pretty much identical and Zcomax cards are just expensive. We have a shitload of EnGenius cards (re-branded Senao) and they've been working fine for months (as long as you're usin
Yes, you can see signal values on both sides of the link if you start the test from the BaseStation (you only see one side with signal values if you start the link test from the client side). Additio
** REPLY SEPARATOR ** Yes. Yes. Yes. No. Yes. They've been operating in outdoor weather conditions for 6 months now. Need I say more? Thanks for the sales pitch for your cards but I'll stick with EnG
Ha! That's funny! I too am tired of hearing people moan about SNR values with Senao cards instead of reading through the countless posts that already address the issue. ** REPLY SEPARATOR ** ________