Has anyone else had any problems flashing the WP-II E?? I just tried to flash 2 of these and they both act the same way.... You can read them with the configev program. Get your license, Open config
Do you have Enable Bridging checked along with Incoming & Outgoing NAT??? If so you will be bridging your private IPs. And it might appear to be a leaky NAT... Nate --Original Message-- From: karlnet
We always inhibit NAT on the 802.11 interface I believe. Is that what your doing? Nate --Original Message-- From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On Behalf Of Dan Metc
Well guys I tried everything i could come up with. Finally called Karlnet... He told me that what you have to do is press the reset button and then just keep pressing the forced reload button until t
Go to WISPCON II... You will probably hear all about that stuff... ;-) Nate --Original Message-- From: karlnet-admin@WISPNotes.com [mailto:karlnet-admin@WISPNotes.com]On Behalf Of Dan Metcalf Sent: T
Well going straight to the dictionary might reveal allot of answers. Here ya go... ;-) in.hib.it Pronunciation Key (n-hbt) tr.v. in.hib.it.ed, in.hib.it.ing, in.hib.its To hold back; restrain. See Sy
We just had a storm that was very exciting for me.... :-) My network is all backup but you still have the aftermath of customers that are having PC problems and what not. And I was just wondering if
Well guys I basically answered my own question. After this last storm it seemed to knock out lots of network adapters in PCs. Or blow ports on a hub/switch. And the Operational Status DOWN did in fac
Who's code?? And what exactly are you grounding outside?? The enclosure? Antenna? Cat5? Just curious. Nate but code requires that you ground outside the entry point - so technically you're still not
BTW- Do you ground all your installs Charles?? Nate but code requires that you ground outside the entry point - so technically you're still not compliant...=( Well guys I basically answered my own qu
How exactly would you go about grounding the Cat5 cable anyway?? Even if you wanted too.... Just use a Network Suppressor and take it to ground or what?? Maybe Im trying to make it too difficult.....
Read your documentation.... ;-) Just kidding man... If ya need any help give me a call. 580-401-6656 Nate I don't see any way to upload the .bin file to the AP. There is no option to "Upload Software
Doesn't anyone have the 802.11b Compatible Access Point working with existing 802.11b clients out in the field? This is a flashrom setup not AP-1000 or 500. I was getting ready to give it a shot and
Has anyone else setup a flashrom unit in 802.11b mode with Karlnet? Mine seems to be working fine but the flashrom lights dont seem to work like they do when it is using Turbocell. Is this normal? If
Does anyone know what the max voltage you can put into a Teletronics DC Injector for a 5.8GHz upconverter? It is going in a weather prrof box to be mounted outside with an RG1000 as well. I was going
Yes I have already tested an RG at 12vdc. And they stop working at about 6vdc as well.. ;-) And if my memory serves me correctly you and even pump al bit more then 12vdc into the RG. But I know for a
How much throughput should we be seeing from one hop to the next with Karlnet? Is there some kind of average to watch for? Nate McLain Chisholm Trail Networks LLC nate@ctrail.net http://www.ctrail.ne
The network currently is one big bridge network. But we have different subnets in place. So I dont think it is going to be a big deal to setup routing. But since Im not a routing gearhead it makes it
Well all of our repeater sites are Flashrom units with basically 3 radios in them. Nate repeater with each throughput me to admin@WISPNotes.com]On Nate McLain Chisholm Trail Networks LLC nate@ctrail.