Larry, I'm interested in knowing what where the general circumstances of these failures. Any commonalities to the failures? I'd be interested in knowing what to avoid during CPE deployment. Norm the
Nate, it seems to me that I've heard people say that the RG will take 12vdc, but I know that the spec'd range is 7-9vdc. Please confirm from others before proceeding. Norm
Interesting point, Kevin. I suppose all of us are perhaps victims of overly optimistic thinking. But that said, here's my situation: very rural, sparsely populated, and about 3-4k households w/in rea
Jim, you can't use 802.11b compatibility mode on the PRISM radios in the AP-1000 either. I had the same mix of radios, however, running fine under TC on the AP-1000. I'd give the mixed TC/.11b a try
Anyone noticing a decline in output power on the PRISM 2.5 100mW card Tony's been selling? I've had two of those cards installed in a AP-1000 since 6/22 running KN 4.x and have noticed a significant
I've been using some PRISM 2.5 100mW radios in my WIPOP, (AP-1000 running TC 4.XX) and they have been performing well. However, KN TC doesn't read the signal or noise levels from these cards correctl
Dan, v4.02 seems to not be capable of asymmetric speed settings, i.e.; the lowest setting on either of the interface becomes the symmetric speed setting. Norm
Hello guys, We have the biggest wildfires in our region's history happening a mere 20 miles from our service area, and unfortunately if fire crews can't stop it in this valley to the west of us (20,0
Ok Eric, thanks. I'll assume that you have them in stock. I already have several accounts on license-it.com, but I'm assuming that another one needs to be set up in case these licenses need to be del
Ok, Charles, problem solved, as far as I'm concerned. Thanks. Eric, the reason I'm not using the existing account is that my current KN vendor, while quite reliable, cannot seem to, in my previous ex
I've found a neat and easy bandwidth monitoring software called stg. (http://leonidvm.chat.ru/) So I've been playing with it, and am able to monitor our router, but would like to apply it to some of
That's what I do, Chris. I recently got so I had the "perfect" SR-4000 config, so now as a starting point, I load it on all CPE's before I change the name of the box. (Which is about all I do...) And
Dan, I've tried this and I'm seeing some strange stuff. Like it appears that setting the BW limit in either interface sets the d/l speed for the customer, with the lowest number predominating. For ex
Thanks, Eric. I guess I'll just stay with v4.02 and hope nobody takes too much advantage of our symmetrical service! Message to Karlnet: Please fix this! Norm is