Hi, We are currently setting up a wireless ISP in Australia, and am about to trial the Karlnet KN-200 boards with Turbocell. We currently do VoIP via ADSL and want to extend this to the wireless netw
Dan & Norm, Thanks for your replies. Our voice service is entirely within our own network so at the moment we control the QOS all the way. With Vonage l could understand that ocationally it would hav
Kevin, Are you able to define "Shortly" I have some boards on order in Australia and am very keen to get my hands on them. Cheers, Phillip Britt Wideband Networks Pty Ltd Dan, We are currently out of
Hi, I am using Veritech (SENAO) Cards in a KN-200 boards and am finding the SNR figures don't display correctly. Orinoco based cards work fine. Is there a fix for this or a workaround?? Thanks, Phill
We have around 15, KN-50 units deployed at this stage and are finding them really good, no duds so far. Some of our links are within 2km's others are out at 15km, and another ISP we work with has one
Hi, We have usually always get 3.0 to 3.2 m/bit through a KN-50. It seems to perform better using Intersil based radios rather than Oronoco based ones. Cheers, Phil --Original Message-- From: karlnet
Nope we don't run WEP. The clients log into a PPTP Server which assigns their IP address and goes 3DES encryption which takes most of the load off the Karlnet gear. We use the Karlnet as a basic brid
Hi, I am using Veritech (SENAO) Cards in a KN-200 boards and am finding the SNR figures don't display correctly. Orinoco based cards work fine. Is there a fix for this or a workaround?? Thanks, Phill
Yes they do support 100mW and 200mW Intersil based cards. We buy them as blank boards and use Veritech 100mW cards with them. Cheers, Phil I like the kn-50 as well since they support PoE directly ...
The KN-50 is limited to either 1 or 5 ethernet clients, however if you use a router between your customers network and the radio network it will apear as one client (MAC). Most customers want some so
Hi All, Just wondering if anyone else is experiencing a strange problem with the KN-205's, running the 4.44-01 firmware. We have 3 KN-205 boards in service all on different sites. About every 2-3 day
The Radios in the KN-205's are Intersil Based Veritech 200mW Cards. The KN-50's are a mixture of Intersil Based Veritech 100mW cards and the Karlnet supplied Dell 30mW Cards. Agreed they need to get
Interesting the suggestion about the increased power, another person l know running a solar site is also looking at moving to 24v. He has done some bench testing and when the voltage drops to just ov
Dan, I find the same thing CPE Side shows a good solid link, and l have also tested from the "Central" site and it shows a good solid link also. Its like the Layer 2 connectivity just disappears. All
Dan, The ONLY devices we use are KN-50's. Haven't had too many problems with them apart from Karlnet shipping 20 of the wrong version code to me last week which has really stuffed up my installs! Goo
To Karlnet's defence, they have contacted all the people that have contributed off-list and asked them to fill in a form with specific details about what versions / radios and other items we are usin
We have one base with 16 clients, and two other bases with 5 each, we have the problem with all of them. For those seeing the problem, how many CPE's do you have on your AP? I have other AP's that ha
Dan, Have you tried the 4.44-2 firmware yet? I have been wondering if l should move to it to try and solve this lockup issue. Also have you sent in the paper work to Karlnet, and if so have you had a
"information request" Dito. We have inter-client traffic blocked on all our KN-205's Phil --Original Message-- From: karlnet-bounces@WISPNotes.com [mailto:karlnet-bounces@WISPNotes.com] On Behalf Of
Thanks for the info. Can you confirm if different releases are required for the different radio boards. We use Intersil based radios, from the licence-it.com site it looks like we can only download t