Hi Chas, Long time no "see". This all seems very strange as I use only one computer per station, sometimes SO2R, and using the IC756 PRO's I just turn on monitor and get everything recorded no proble
Never could understand it, but some state in these machines is only affected by a full power down. Must be some hardware designer that didn't full appreciate the issues HI HI All the besst to all of
My experience if you can hear it and it doesn't get to the radio is that it is on the opposite channel from the radio, so tell WL it's the left ( or right ) radio and problem solved. Assuming it work
John, Just search the help file for mouse and find: in the .INI you will find. [configuration] MOUSE_WHEEL_HZ=10 Set it as you want 73, Ric KV1W -- Original Message -- From: "John Pritt" <n1jp@arrl.n
Having read all the other comments so far, I will add only about 2 cents worth. I have migrated to all W2K machines. W2K Server on one ( does the usual server stuff plus all antenna farm control ) Th
I believe it has always worked that way. The way we use it here is just record at the same time you are doing it for real. If you don't like it, then reocrd the next one you do. Kills two birds with
Paul Works fine here for that config. We telnet to ARCluster with one station and then the others choose local network to connect over the "Writelog network" and get the info. Anyone can send spots a
Chris It's quite possible. What you need to do is use the A/B line on that port to "steer" the CW ( and PTT for that matter ) to the desired radio. Works great. I used a Radio Shack DPDT relay to do
Jerry, First the good news, YES Writelog will control the G1000DXA. Now for the bad news. The interface signals are only CW, CCW, Analog for position and I think a sped control analog signal. The GS2
The IC756, thru the CT-17 adapter or other, requires no control lines, only Txd and Rxd. Ric KV1W to Icom Is the you make the left To: <writelog@contesting.com> -- WWW: http://www.writelog.com/ Submi
The Sartek board IS SUPPORTED in 10.22B Ric KV1W control obviously -- WWW: http://www.writelog.com/ Submissions: writelog@contesting.com Administrative requests: writelog-REQUEST@contesting.com Probl
Hi Ron, As a very involved and active user of Writelog, I think this is a well thought out plan and will certainly get our ( KV1W M/M team's ) support. $30 per year for the kind of product and suppor
John, I think the key to your question lies with the fact that the FT990 doesn't have a transmit command via serial ( I sold mine so can't verify, but believe this is true ). So, you need to fabricat
Marty I guess what I would do id go to Radio Shack and get a shell that holds a 25 pin connector in each end Wire what you need across and put the transistors or opto's in it and bring out the PTT cn
Ray Is this a LPT port interface of COM port ? Jack makes both Ric KV1W -- WWW: http://www.writelog.com/ Submissions: writelog@contesting.com Administrative requests: writelog-REQUEST@contesting.com
Paul, With the present set up, when you tab to the RST you are positioned to enter a different "S" if you wish. I think we already have the best of all worlds Ric KV1W -- WWW: http://www.writelog.com
I am still looking for folks using only W2K in a networked environment with WriteLog. Would like to compare some issues Ric KV1W -- WWW: http://www.writelog.com/ Submissions: writelog@contesting.com
I would suggest that any time color is used there should be an adidtional or alternate method as some folks can't distinguish color as well as others Ric KV1W would so -- WWW: http://www.writelog.com
Hi All, There have been a lot of questions about the W5XD+ keyer and the dual opto isolater that is designed in. I have recently built 3 of these and had no opto's, so: If your rig ground is common w
Well Folks, I just built three of these fine little guys and I found a Radio Shack box ( 270-1806 ) that I modified to do the job. It was just the size of the board, so I cut 3/4" slots front and rea