For the benefit of others, the problem was that all but one CATEGORY-**: ** lines were missing from the Cabrillo header, yet the NCJ web form reported "no Cabrillo errors". But, the form was still st
I couldn't find what is specifically meant by "they can transmit and receive". In what ways can they transmit RTTY, yet the Fn keys are not working? For example, in WriteLog can they open the keyboar
Typo corrected below ... For the benefit of others, the problem was that all but one CATEGORY-**: ** lines were missing from the Cabrillo header, yet the NCJ web form reported "no Cabrillo errors". B
Actually, the original header already was labeled version 3. However, the problem would have existed with either version because there was no power declaration of category. Ed - W0YK ________________
You'll need to update your WriteLog version to the one that supports the IC-7600. 10.83 supports the IC-7600, and you can consult the revision history to see which version it was added. Ed - W0YK ___
Oh, Nels, whatever you do, don't stop working us with your ND mult! ; >) Ed - W0YK _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contestin
Ed - W0YK _______________________________________________ WriteLog mailing list WriteLog@contesting.com http://lists.contesting.com/mailman/listinfo/writelog WriteLog on the web: http://www.writelog.
Yes, this work-around works for me too. I reported the same here on the reflector on 21 February following ARRL DX CW: P40L (W6LD and W0YK) ran 10.84d with a message '%C <<ENN^K>>' and WinKey2 versio
WriteLog's initial installation stores a default writelog.ini in the Windows directory, e.g., C:\Windows\writelog.ini. However, whenever writelog.ini is edited by WriteLog, Windows 7 stores the worki
SSB and CW do work the same as RTTY with regard to the lockout in WriteLog. What is different, though, is that CW may be sent by paddle (or, SSB by microphone) and WriteLog has no way of knowing and
That's right, the lockout is across all computers on the network. From the Help file ... Tools RTTY Single Transmitter Lockout There are two modes for doing transmitter lockout's for RTTY. Both of th
Are both TNCs on one audio stream or on different streams, e.g., main and sub-RX? Ed - W0YK -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. Is it possible to open two Rttyrite
The default COM port numbers are 1-8, but this range can be changed in writelog.ini. See the Help file. Ed - W0YK _______________________________________________ WriteLog mailing list WriteLog@contes
Do you have a working LPT port connected to the DXD? That is how the radio steering signal gets from WriteLog to the DXD. In WriteLog, you must have selected '2' in Radios/Number of Radios. Ed - W0YK
This feature works great to save having to hit Space Bar on every QSO to move the cursor from the Callsign field to the Exchange field. That is, it works when using Insert to send Call/Exchange or wh
I use the Edgeport/4 which is an industrial-grade adapter retailing for over $300, but surplus on eBay for around $30. It has 4 Serial ports and has been flawless in CW, RTTY, rig control, TNC contro
Yes, the robot has been tested to correct the contest name. Ed - W0YK/4 -- Sent from my Android phone with K-9 Mail. Please excuse my brevity. As Gary says, use the ARRL RTTY Roundup module for The 1
My pre-fill databases for RTTY Round-Up delete all non-US/VE/XE calls. I also delete all fields from the QSO data except for call and QTH. That makes a very compact file that loads in just a few seco
For anyone else wondering about this, please see the rules at http://www.rttycontesting.com/the10meterrttycontest/rules.html where it explains that the ARRL RTTY Round-Up module of any logger may be
Please see the rules at http://www.rttycontesting.com/the10meterrttycontest/rules.html where it explains that the ARRL RTTY Round-Up module of any logger may be used. Also, Don AA5AU posted a nice su