Same problem (10.36) here, but with recorded voice messages. Set it up correctly, press The Fx key, keys up, but no audio. Go to Windows Explorer, play the message and it then works in Writelog. But
Well, you could enter the frequency on the keypad. Not as fast as clicking, but you don't have to do any spinning. 73, Paul You can't do it. (Aw come on, someone prove me wrong ;-) 73, Barry N1EU To:
I had the same problem - was not RF, would sometimes lock up with rig set to not key = no rf. Sent it back, said they found no problem. But, it does work fine with just the messages from Writelog. Li
Same problem myself - even if I use the PK232 for the RTTY interface. I reported it, but never heard anything. To: <writelog@contesting.com> ______________________________________________________ Get
I've had the same problem, WL crashes with the rtty window open - whether I use the sound card or the PK232. No other programs running (at least that I know about) - only other active com port in use
Glad I didn't wait til Friday to test this Running Writelog 10.50D under XP SP2 Start Writelog - do Setup - Ports - Wave file locate. F4 (my call) and F2 (report) work, but only once. Press either ag
Some added findings - I'm using a PC soundcard The first time I press F4 the message plays, the second time I press F4 no message plays but the CAT light on the MP stops blinking. From: "Paul Franson
Wow, if you set the radio (MP) to SSB it works fine. -- From: "Paul Franson" <w2le@hotmail.com> To: writelog@contesting.com Subject: [WriteLog] F keys send wav file only once Date: Wed, 27 Oct 2004 1
Just tried having DX4WIN and Wriitelog connect to VE7CC - works fine. Paul W2LE Subject: Re: [WriteLog] Using VE7CC AR Cluster with WL Date: Mon, 17 Jan 2005 12:35:57 -0800 (PST) Can more than one pr
Just tried CW today using new 10.54C update. Send a CW message and hit esc or pgup or pgdwn a relay in the Multi Keyer clicks and it stops sending. Have to power the keyer off and on to make it work
Never mind - operator error. Had keyer remote control set to right radio and program set to left radio. Just tried CW today using new 10.54C update. Send a CW message and hit esc or pgup or pgdwn a r
Did you grab T09A from a spot? I got nailed by this also - many times it was spotted as T09A - with a zero, not a letter O. Lots of other bad spots also - became almost useless Paul W2LE After adding
Noticed the same thing myself, maybe only 3% out of 750 QSO's. Also 10.61 with an IC-7800 Paul W2LE I have 10.61 installed and noticed an annoying issue with point and shoot out of the packet spot wi
I've got Vista RC1 running on a separate hard drive. Tried the basic Writelog functions, all seems to work ok - even serial port keying through a Multi-Keyer. And it could read the freq from the IC-7
Just setting up a new Micro Keyer with Writelog. It reads the IC-7800 freq ok, sends CW ok through the Winkey interface. But the PTT doesn't work. In MK Control is on Com3, Winkey on Com4, and PTT on
Problem fixed, mis-read the CW PTT Setup screen, saw LPT and missed the '/com rts' Just setting up a new Micro Keyer with Writelog. It reads the IC-7800 freq ok, sends CW ok through the Winkey interf
Did you fill in 'parameter setup' under setup? It's working for me Paul W2LE Yes, it seems to be broken. I created a cabrillo file just to see what that showed and it is only counting 2 points per QS
Correction - that's under 'contest' From: "Bob Lafont" <bob.lafont@gmail.com> To: Dan <n8ie@woh.rr.com> CC: WL <writelog@contesting.com> Subject: Re: [WriteLog] 10.61E and Stew Perry contest Date: Sa
In case you're looking for a Multi-keyer I've got one listed on Ebay - item 120078889190. Paul W2LE _________________________________________________________________ Laugh, share and connect with Win
Item number correction 120078829190. Selling it because I bought a micro-keyer, needed for the USB connection. Paul W2LE From: "Paul Franson" <w2le@hotmail.com> To: writelog@contesting.com Subject: [