I know this is a long shot,but thought I would ask. Does anyone have any of the up date parts for the Jupiter? 1. the blue screen conversion kit. 2. the latter black cabinet. 3. the dress up knob kit
Need the manual for the ten tec 1208 or any of the other ten tec transverters. copy is fine or a pdf file also. can pay via pay pal or USPS MO. 73 DALE WT4T __________________________________________
Looking for the remote tuning pod for the OMNI-VI SERIES OF RADIOS. COLOR OR COSMETICS NOT IMPORTANT. Would like to do Pay Pal or USPS MO. 73 dale wt4t _______________________________________________
Have a beautiful OMNI-VI,new to me. I noticed the frequency readout is off about .68 on the readout. checked with my Sig gen and then with a zero beat on WWV. Went Thur the manual,nothing about this
Ken thanks for the info,main problem is all my test gear is about as old as I am. None of it tight enough for a a adjustment this fine. Can live with it for now,when tentec gets settled in the new pl
Hi Mike The radio is off across all modes. Think maybe its time to send it home for a checkup. I just don't have a bench thats tight enough to align what needs to be done ,as explained by some of the
Wade thanks for the info. After reading yours and a few others ,I think its time for a trip to ten tec. My bench works just fine ,for all my boat anchors ,but not for this application. Heath kit test
Charles Is a great idea to use the computer ,my problem is my shack computer is a mac. not saying these programs aren't available for the mac,I have never seen them. Since the VI has a coupla of othe
Sent my OMNI_VI to ten tec two weeks ago. Just was not running up to snuff,like it used to. Heard from them today. the rig was way out of alignment and also the bandpass and bfo. They told me the no
When I wrote my original e mail about ten tec being unable to repair the noisy mixer board on my OMNI-VI, I think the point of the e mail was lost. I do not have the bench or the test gear any longer
THIS IS A FACTORY ASSEMBLED UNIT. comes with power supply cable and full manual. Works 100%, no issues. the # 1208 uses 20 meter's, for its IF. Unit looks as new.would like to do pay pal or USPS MO.
Have a real nice 705 ten tec desk mic for sale. asking 50.00 shipped. pay pal or USPS MO 73 dale wt4t _______________________________________________ TenTec mailing list TenTec@contesting.com http://
Bill mic is like new, 4 pin connector and works the same. do not have a digital camera. can do pay pal -- wt4t@reagan.com. 73 dale wt4t Would it be possible to attach a picture? Bill, ai0d __________
Just bought a omni-V, It has a N4PY chip installed says version .9? the radio does not have any of the chips stickers left on the buttons. I beleive there may be a latter chip from N4py 9.2? and any
If your using a stock OMNI-V ,No N4PY chip, how do you calibrate the display, if not reading correctly? On 14.300 I read 14. 299.87. Read thru the manual but must have missed it . Would really apprec
I downloaded the instruction pages from carls website. went to the crystal calibration section. Here is what is going on. I made paper labels for all the buttons per the website. frequency I want is
Thanks to carl and others problem solved, I had labeled the bottom row on the keypad wrong, needed to label the row above. switched the labels ,all is good. calibration now dead on. thanks dale wt4t
Joe the labels are no big deal. unless you want the OMNI-V to look like it came from the factory. My V had the chip, but no labels. I down loaded the pdf from carls site about the chip. He has the la
Anyone have a 1.8 filter for the 6.3 IF, or a 1.8 for the 9.0 IF? Also would like to get the speech board and the FM board.ten tec or inrad filters are fine. 73 dale wt4t ____________________________
i have an omni VII with the 2 optional cw filters, cooling fan, internal tuner, manual and power cord. no mic. it will be back from ten tec next week. $1500 with some help on shipping. e mail me kart