- 1. [Amps] GS-35B Tubes Glow In The Dark (score: 1)
- Author: Tony King - W4ZT <amps080605@w4zt.com>
- Date: Fri, 24 Feb 2006 00:58:32 -0500
- Friends, Recently I have worked on a friend's GS-35B two tube amp. I replaced both tubes in it. During the testing after the tube swap I noticed that by looking straight down through the anode cooler
- /archives//html/Amps/2006-02/msg00485.html (7,789 bytes)
- 2. Re: [Amps] GS-35B Tubes Glow In The Dark (score: 1)
- Author: Bill Turner <dezrat@copper.net>
- Date: Fri, 24 Feb 2006 03:35:36 -0800
- ORIGINAL MESSAGE: ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Many tubes do this, including small receiving tubes. You will often see a blue glow on the inside surface of the glass (not between
- /archives//html/Amps/2006-02/msg00489.html (7,875 bytes)
- 3. Re: [Amps] GS-35B Tubes Glow In The Dark (score: 1)
- Author: HAROLD B MANDEL <ka1xo@juno.com>
- Date: Fri, 24 Feb 2006 13:51:38 -0500
- Dear Tony, What do you think the results would be if you removed the tubes and very thoroughly cleaned them with hot water and soap first and a finish with isopropanol, all handled with new clean rub
- /archives//html/Amps/2006-02/msg00511.html (7,961 bytes)
- 4. Re: [Amps] GS-35B Tubes Glow In The Dark (score: 1)
- Author: Tony King - W4ZT <amps080605@w4zt.com>
- Date: Fri, 24 Feb 2006 14:21:26 -0500
- That's an intriguing idea Hal. I can try it and see if it has any effect but it will be at least Sunday before it gets done (getting ready for the Dalton, GA hamfest now). Though there might be somet
- /archives//html/Amps/2006-02/msg00513.html (9,455 bytes)
This search system is powered by
Namazu