Author: Michael McDermott <michael@veritech.com.au>
Date: Wed, 19 Nov 2003 17:17:54 +1100
I'm currently having problems with 100/200mw Senao cards in RG-1100 devices. The RG-1100 device will not totally boot up with the 200mw card (freezes half way thru the boot up process), but will boot
Hi Power cards with Prism 2.5 are supported just in Trubocell mode. Start with an Orinoco, configure the interface as Turbocell (not AP) save the configuration and then switch to your Hi Power card..
use the KN-100 boards? usually, it's a sign of not enough power at the RG (since the power draw of the prism cards is higher) - how are you powering the RG? Poe? or the wall wart -Charles I'm current
Author: Michael McDermott <michael@veritech.com.au>
Date: Wed, 19 Nov 2003 18:05:36 +1100
Guillermo, Thanks for your assistance. Your advice worked. Regards, At 10:24 PM 18/11/2003 -0800, you wrote: Hi Power cards with Prism 2.5 are supported just in Trubocell mode. Start with an Orinoco,
Author: Michael McDermott <michael@veritech.com.au>
Date: Wed, 19 Nov 2003 18:08:05 +1100
We do use KN-100 boards but this customer has existing RG-1100 units that he would like to use. BTW, I thought it was a power supply problem too, but it obviously wasn't. But thanks for your prompt r
Author: Michael McDermott <michael@veritech.com.au>
Date: Wed, 19 Nov 2003 17:17:54 +1100
I'm currently having problems with 100/200mw Senao cards in RG-1100 devices. The RG-1100 device will not totally boot up with the 200mw card (freezes half way thru the boot up process), but will boot
Hi Power cards with Prism 2.5 are supported just in Trubocell mode. Start with an Orinoco, configure the interface as Turbocell (not AP) save the configuration and then switch to your Hi Power card..
use the KN-100 boards? usually, it's a sign of not enough power at the RG (since the power draw of the prism cards is higher) - how are you powering the RG? Poe? or the wall wart -Charles I'm current
Author: Michael McDermott <michael@veritech.com.au>
Date: Wed, 19 Nov 2003 18:05:36 +1100
Guillermo, Thanks for your assistance. Your advice worked. Regards, At 10:24 PM 18/11/2003 -0800, you wrote: Hi Power cards with Prism 2.5 are supported just in Trubocell mode. Start with an Orinoco,
Author: Michael McDermott <michael@veritech.com.au>
Date: Wed, 19 Nov 2003 18:08:05 +1100
We do use KN-100 boards but this customer has existing RG-1100 units that he would like to use. BTW, I thought it was a power supply problem too, but it obviously wasn't. But thanks for your prompt r