- 1. [RFI] RF Feedback - FL7000 AMP (score: 1)
- Author: Tony <dxdx@optonline.net>
- Date: Wed, 19 Aug 2009 03:51:29 -0400
- All, I have what seems to be a unique situation with a Yaesu FL7000 solid state amplifier. The protection circuit trips for no reason in SSB mode, but works fine on CW and digital modes. The protecti
- /archives//html/RFI/2009-08/msg00006.html (6,673 bytes)
- 2. Re: [RFI] RF Feedback - FL7000 AMP (score: 1)
- Author: "WA3GIN" <wa3gin@comcast.net>
- Date: Wed, 19 Aug 2009 07:40:19 -0400
- Does the problem occur when feeding a dummy load? _______________________________________________ RFI mailing list RFI@contesting.com http://lists.contesting.com/mailman/listinfo/rfi
- /archives//html/RFI/2009-08/msg00007.html (6,525 bytes)
- 3. Re: [RFI] RF Feedback - FL7000 AMP (score: 1)
- Author: Don Moman VE6JY <ve6jy.1@gmail.com>
- Date: Wed, 19 Aug 2009 14:57:03 +0000
- It's not an RF feedback issue. The FL7000 is super touchy on overdrive in SSB and you need to do the mods to desensitize the protection circuitry. The unit I have, it was imposible to get near rated
- /archives//html/RFI/2009-08/msg00008.html (8,029 bytes)
- 4. Re: [RFI] RF Feedback - FL7000 AMP (score: 1)
- Author: Tony <dxdx@optonline.net>
- Date: Wed, 19 Aug 2009 14:42:17 -0400
- Don, I'm glad you mentioned this because the protection circuit was tripping on several bands before I installed a line isolator on the feed lines. It doesn't trip at all now even when I forget to se
- /archives//html/RFI/2009-08/msg00009.html (9,489 bytes)
- 5. Re: [RFI] RF Feedback - FL7000 AMP (score: 1)
- Author: "Jim Brown" <jim@audiosystemsgroup.com>
- Date: Wed, 19 Aug 2009 12:36:16 -0700
- I wouldn't rule out RF feedback. My two FT1000MPs have a pin 1 problem at the mic connector that causes RF feedback on 75M and 15M. Measurements of that pin 1 problem show a broad peak around 5 MHz a
- /archives//html/RFI/2009-08/msg00010.html (8,151 bytes)
This search system is powered by
Namazu