- 1. [TenTec] Omni VI+ Filters (score: 1)
- Author: jreid@aloha.net (Jim Reid)
- Date: Mon, 7 Sep 1998 18:36:40 -1000
- Ok, now the web site is back and info can be obtained. So, if I order a rig tomorrow, or Wednesday, do I specify which CW line up (with the occasional need to be on SSB) 6.3 MHz, all three options of
- /archives//html/TenTec/1998-09/msg00118.html (7,256 bytes)
- 2. [TenTec] Omni VI+ filters (score: 1)
- Author: "Paul DeWitte K9OT" <k9ot@mhtc.net>
- Date: Wed, 19 Nov 2003 12:19:39 -0600
- I will be using a new to me Omni VI+ in the ARRL 160m contest. I presently have all of the filter slots filled except for the 9MHZ IF which has a 500 HZ filter in one slot and the other one is open.
- /archives//html/TenTec/2003-11/msg00560.html (7,163 bytes)
- 3. Re: [TenTec] Omni VI+ filters (score: 1)
- Author: Duane A Calvin <ac5aa@juno.com>
- Date: Wed, 19 Nov 2003 12:53:34 -0600
- Paul, I think you'll be very happy with the 500 + 250 Hz filters cascaded. That's the setup in my VI+ and it works very well. (My other 9MHz slot has the 500Hz RTTY offset filter.) 73, Duane On Wed,
- /archives//html/TenTec/2003-11/msg00562.html (8,397 bytes)
- 4. Re: [TenTec] Omni VI+ filters (score: 1)
- Author: "Don K5AQ" <donhall@myriad.net>
- Date: Wed, 19 Nov 2003 13:16:43 -0600
- Paul, Go for the 250 HZ filter. When you need it, you need it. 73 Don K5AQ Omni VI owner _______________________________________________ TenTec mailing list TenTec@contesting.com http://lists.contest
- /archives//html/TenTec/2003-11/msg00564.html (7,211 bytes)
- 5. Re: [TenTec] Omni VI+ filters (score: 1)
- Author: "john, ke5c" <ke5c@hot.rr.com>
- Date: Wed, 19 Nov 2003 13:15:36 -0600
- you'll get as many opinions as answers. i had and got rid of 250 Hz filters in my 6+ because they were always too narrow for me. 160 is a little different since it is a "weak signal" contest, and yo
- /archives//html/TenTec/2003-11/msg00565.html (7,834 bytes)
- 6. [TenTec] Omni VI+ filters (score: 1)
- Author: "Rob Atkinson, K5UJ" <k5uj@hotmail.com>
- Date: Wed, 19 Nov 2003 20:39:13 +0000
- I operate with the 250 hz filters in both IFs when I ragchew on low band (80 m. in my case) cw. The reason is that together, they cut way down the low band QRN which is usually broad. There is absolu
- /archives//html/TenTec/2003-11/msg00571.html (7,585 bytes)
- 7. Re: [TenTec] Omni VI+ filters (score: 1)
- Author: Ken Brown <ken.d.brown@verizon.net>
- Date: Wed, 19 Nov 2003 19:26:34 -1000
- My question is, is it worth it to go ahead and add the 250 HZ filter in the 9MHZ or does it make it too narrow? Switching in and out the 500 HZ filter sure makes a difference on close QRM. Hi Paul, I
- /archives//html/TenTec/2003-11/msg00573.html (8,219 bytes)
- 8. Re: [TenTec] Omni VI+ filters (score: 1)
- Author: "Ben K8DIT" <benk8dit@serv.net>
- Date: Wed, 19 Nov 2003 23:19:45 -0800
- I agree, in fact that's what I did. I listen to cw with the 1.8khz/6.3mhz filter and upon finding a signal that needs filtering help I then engage the 500hz/6.3mhz filter, if it needs more, I engage
- /archives//html/TenTec/2003-11/msg00574.html (8,444 bytes)
- 9. [TenTec] Omni VI+ filters (score: 1)
- Author: "Paul DeWitte K9OT" <k9ot@mhtc.net>
- Date: Thu, 20 Nov 2003 09:37:30 -0600
- I would like to thank ALL of the people who responded to my inquiery about the 250HZ filter in the 9MHZ slot. All very nice responses. Some thought it was not needed in their situation and some said
- /archives//html/TenTec/2003-11/msg00577.html (7,956 bytes)
- 10. Re: [TenTec] Omni VI+ filters (score: 1)
- Author: "jack" <jfriend31@comcast.net>
- Date: Thu, 20 Nov 2003 17:03:51 -0700
- i have a 400 hz filter for CW in the ic756 and 500 hz for the Orion ...they are so different i am amazed. the Orion filter is wonderfully clean, no ringing at all ...and the signal jumps out ...can h
- /archives//html/TenTec/2003-11/msg00584.html (9,927 bytes)
- 11. Re: [TenTec] Omni VI+ filters (score: 1)
- Author: Sam <veast1@charter.net>
- Date: Mon, 18 Jan 2010 14:34:59 -0800
- I also have the Omni VI+ and what i did to widen the SSB RX response was to install the INRAD SSB mod which consists of some capacitors that replace existing caps on the board. What it does is to mov
- /archives//html/TenTec/2010-01/msg00208.html (7,654 bytes)
- 12. Re: [TenTec] Omni VI+ filters (score: 1)
- Author: John Peters <k2lot@roadrunner.com>
- Date: Mon, 18 Jan 2010 20:50:03 -0500
- Well now, Sam or Paul, Please let me know the places you replaced the caps, and the values of them etc. my address is k2lot@roadrunner.com Thank you _______________________________________________ Te
- /archives//html/TenTec/2010-01/msg00211.html (8,549 bytes)
This search system is powered by
Namazu