- 1. [TowerTalk] Penetrox cleaning (score: 1)
- Author: Doug Wetzel <dougwe2@gmail.com>
- Date: Sat, 22 Feb 2014 09:46:36 -0800
- I recently became the owner of a used KT34M2 that had been up for several years. Is it advisable to completely disassemble and clean off all the Penetrox before putting it back on the tower? What's t
- /archives//html/Towertalk/2014-02/msg00215.html (6,613 bytes)
- 2. Re: [TowerTalk] Penetrox cleaning (score: 1)
- Author: Ralph Bellas <k9zo@hotmail.com>
- Date: Sat, 22 Feb 2014 13:47:21 -0600
- Doug, I use WD40 and a green scouring pad. I wear gloves for this job because your hands will get stained. It seems to work as well as fine steel wool. Invariably I got a sliver of steel wool in my h
- /archives//html/Towertalk/2014-02/msg00217.html (8,097 bytes)
- 3. Re: [TowerTalk] Penetrox cleaning (score: 1)
- Author: EZ Rhino <EZRhino@fastmovers.biz>
- Date: Sat, 22 Feb 2014 15:04:36 -0700
- +1. WD40, elbow grease and scotch brite work wonders. Chris KF7P Doug, I use WD40 and a green scouring pad. I wear gloves for this job because your hands will get stained. It seems to work as well as
- /archives//html/Towertalk/2014-02/msg00220.html (8,834 bytes)
- 4. Re: [TowerTalk] Penetrox cleaning (score: 1)
- Author: <john@kk9a.com>
- Date: Sat, 22 Feb 2014 20:18:08 -0500
- Steel wool breaks up and I would avoid using it on antennas. Scotch Brite works great and wont cause any rust issues. I'm sure that a number of solvents will dissolve the penetrox. John KK9A Doug, I
- /archives//html/Towertalk/2014-02/msg00224.html (7,821 bytes)
- 5. Re: [TowerTalk] Penetrox cleaning (score: 1)
- Author: Patrick Greenlee <patrick_g@windstream.net>
- Date: Sun, 23 Feb 2014 07:19:45 -0600
- Steel wool will shed as John said and then rust. You can use stainless steel wool (available but not at every little corner market or local Walmart.) Bronze wool doesn't rust and doesn't shed as bad
- /archives//html/Towertalk/2014-02/msg00227.html (9,985 bytes)
This search system is powered by
Namazu