I was curious and found this. Taco sells the same tower that Wade did as Delhi The install instructions for Taco DMX are here http://www.tvantenna.com/products/tvreception/mounting/towers/taco/dmx/DM
Thank you Kevin ! I thought I surfed to the end of the internet, but sure didn't find that doc. Much appreciated ! I have a split washer, not the star washer as per the diagram, so I will endeavour t
I was curious and found this. Taco sells the same tower that Wade did as Delhi The install instructions for Taco DMX are here http://www.tvantenna.com/products/tvreception/mounting/towers/taco/dmx/DM
I am using 3/4" grade 5 (F593C) stainless bolts on my Delhi HD and wondered if anyone has a torque spec for these in this application? Looking at the Taco/Delhi installation sheet I see they have spe
Kirb, I have never heard of grade 5 stainless bolts, but regardless, the bolts on a Delhi tower are shouldered or rather the tower is designed to use shouldered bolts and I am not sure if it is a goo
I have used some non shouldered bolts on my Delhi towers and I haven't had any problems. I have reused the Delhi internal washers many times without failure. I know you should turn the bolt and not t
One way to distill the question of the joints (and applies to all self-supporting towers) If you just hand tighten the nut and bolt, (all 3) and then try to move the metal tower legs up and down, how