Hello all: I have an installed Tashjian tower, which I guess used to be Tri-Ex. It is a 70 ft 4 section nesting tower. I have purchased a Hy-Gain Tailtwister II rotator which--OOPS!-- looks as though
Rusty, You can use the T2X in the LM-470, if that is the model you have. You'll need to use spacers to raise the plate up about 1 1/2" inches, to allow the rotor to clear the cross braces. Karl Tashj
I have an LM-470D Tri-Ex with a T2X in it. The widest part of the rotator when mounted on the shelf will hit the side bars. I had made 4 stainless steel cylinders with 1-1/2 inch diameters and holes
Rusty: I have a TriEX W51 crank up, just 50 ft. and in my instructions it limited the largest HyGain rotor to the Ham IV. Your instructions should say something similar, at least mine in 1993 did. Wh
That is precisely what Tashjian recommends. _______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://list
Will a Yeasu 2800DXA fit? My tower is on order. Same #6 top section on a LM-354HD SP. I was going to order the rotator soon. This got me worrying if the Yeasu will fit. John Wa5zup Rusty, You can use
To all who responded, many thanks! Skip, I would love to see a picture, if it is convenient. Again, thanks to all. Rusty, na5tr Rusty, You can use the T2X in the LM-470, if that is the model you have