Mail Archive Search: <+subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[Towertalk\]\s+40\s+m\s+yagi\s+matching\s*$/>

Results:

References: [ +subject:/^(?:^\s*(re|sv|fwd|fw)[\[\]\d]*[:>-]+\s*)*\[Towertalk\]\s+40\s+m\s+yagi\s+matching\s*$/: 7 ]

Total 7 documents matching your query.

1. [Towertalk] 40 m yagi matching (score: 1): Author: mpride@us.ibm.com (Mark Pride); Date: Wed, 2 Oct 2002 08:04:16 -0400; Fellow TTer's: Problem - Have a 2 element yagi on 40 M that is currently tuned for the CW end of the band. In order to use it on the SSB end, past techniques have included locating a Transmatch at th; /archives//html/Towertalk/2002-10/msg00060.html (8,490 bytes)
2. [Towertalk] 40 m yagi matching (score: 1): Author: K7LXC@aol.com (K7LXC@aol.com); Date: Wed, 2 Oct 2002 09:55:23 EDT; Ah - you must have the antenna settings at CW. If you ever have a chance to take the antenna down, I would suggest using the 'secret LXC' settings. By splitting the measurements between CW and MID, y; /archives//html/Towertalk/2002-10/msg00063.html (7,449 bytes)
3. [Towertalk] 40 m yagi matching (score: 1): Author: K4MK@triad.rr.com (Kent Miller); Date: Wed, 02 Oct 2002 10:40:41 -0400; Hi Mark, How high is your swr on the upper end ? My 40-2cd is tuned for 7.150, but at the worst case at 7.000 the swr is only 2.2 to 1.0 and at 7.300 it is only 1.7 to 1.0....... My antenna is at 130; /archives//html/Towertalk/2002-10/msg00066.html (9,660 bytes)
4. [Towertalk] 40 m yagi matching (score: 1): Author: n4kg@juno.com (n4kg@juno.com); Date: Wed, 2 Oct 2002 08:59:26 -0600; Mark, I am also using a CC 402CD at 95 ft, about 300 ft behind my house, fed with 3/4 inch CATV hardline. I use a Drake MN2000 to tune on SSB. Try adding some coax to find a 'better' impedance range; /archives//html/Towertalk/2002-10/msg00067.html (10,386 bytes)
5. [Towertalk] 40 m yagi matching (score: 1): Author: stevek@jmr.com (Steve Katz); Date: Wed, 2 Oct 2002 08:14:43 -0700; I'd presume the actual VSWR is higher than you're reading, since it's being improved by the loss of 350 feet of 52 Ohm coax..... -WB2WIK/6 "If everything seems under control, you're just not going fa; /archives//html/Towertalk/2002-10/msg00070.html (11,308 bytes)
6. [Towertalk] 40 m yagi matching (score: 1): Author: mpride@us.ibm.com (Mark Pride); Date: Wed, 2 Oct 2002 15:13:39 -0400; Good comments from everyone. Thanks! One might think that this was a loaded question - it was! I spent the last week or so taking an alternative approach. See below... Here is what I came up with. Fi; /archives//html/Towertalk/2002-10/msg00084.html (11,348 bytes)
7. [Towertalk] 40 m yagi matching (score: 1): Author: ve7hcb@rac.ca (Chris BONDE); Date: Wed, 02 Oct 2002 17:53:34 -0700; Can you change the length of the elements? I think that CW would be onger than SSB so if you can shorten the elements would that not work? GURUs? Chris opr VE7HCB; /archives//html/Towertalk/2002-10/msg00093.html (9,700 bytes)

Current List: 1 - 7
Page: [1]