- 1. [WriteLog] Re: WL10.26B and FT-847 (score: 1)
- Author: kkii@hcc1.bai.ne.jp (Katsuyuki ISHII)
- Date: Mon, 16 Apr 2001 06:10:07 +0900
- I forgot to tell which cable I used. I used a cross cable. I opened the Port window and set as follows: port:com 2, rig:FT-847, baud:4800, PTT:no Then what happned is I mean the radio display did not
- /archives//html/WriteLog/2001-04/msg00175.html (8,545 bytes)
- 2. [WriteLog] Re: WL10.26B and FT-847 (score: 1)
- Author: kkii@hcc1.bai.ne.jp (Katsuyuki ISHII)
- Date: Mon, 16 Apr 2001 23:08:30 +0900
- Hi, Jerry. Thank you for your reply. Could you please give me any comparisons ? Today I set up CT on another PC and checked my cross cable again. Then my cable worked well and CT followed the changes
- /archives//html/WriteLog/2001-04/msg00181.html (8,734 bytes)
- 3. [WriteLog] Re: WL10.26B and FT-847 (score: 1)
- Author: jpixton@shentel.net (Jerry Pixton)
- Date: Tue, 17 Apr 2001 12:55:32 +0000
- Katsuyuki, Here is what I did yesterday to make sure that things still worked with Writelog and FT847 BTW I used Windows 98 Second Edition. 1. Use the cable that works with CT - the crossed cable! Co
- /archives//html/WriteLog/2001-04/msg00185.html (11,984 bytes)
- 4. [WriteLog] Re: WL10.26B and FT-847 (score: 1)
- Author: kkii@hcc1.bai.ne.jp (Katsuyuki ISHII)
- Date: Wed, 18 Apr 2001 06:54:28 +0900
- -- Katsuyuki Ishii kkii@hcc1.bai.ne.jp -- WWW: http://www.writelog.com/ Submissions: writelog@contesting.com Administrative requests: writelog-REQUEST@contesting.com Problems: owner-writelog@contesti
- /archives//html/WriteLog/2001-04/msg00189.html (7,991 bytes)
- 5. [WriteLog] Re: WL10.26B and FT-847 (score: 1)
- Author: kkii@hcc1.bai.ne.jp (Katsuyuki ISHII)
- Date: Thu, 19 Apr 2001 23:26:46 +0900
- Hi, folks: According to Jerry's advise, I have been trying to connect my FT-847 on Writelog, but not yet succeeded. Looking at BIOS setup in my protable PC, I found the com port 2 (2f8, IRQ3) was ass
- /archives//html/WriteLog/2001-04/msg00203.html (8,769 bytes)
- 6. [WriteLog] Re: WL10.26B and FT-847 (score: 1)
- Author: kkii@hcc1.bai.ne.jp (Katsuyuki ISHII)
- Date: Thu, 19 Apr 2001 23:39:52 +0900
- I forgot something. I tried to connect my FT-847 on Writelog in another PC of mine and succeeded. Windows 2000 is installed on it. So my crossed cable is fine and just my protable PC or Windows NT 4.
- /archives//html/WriteLog/2001-04/msg00204.html (8,451 bytes)
- 7. [WriteLog] Re: WL10.26B and FT-847 (score: 1)
- Author: jpixton@shentel.net (Jerry Pixton)
- Date: Fri, 20 Apr 2001 11:12:33 +0000
- Katsuyuki, OK, we know the cable between computer and FT847 is ok Writelog is ok and the radio is ok. I would not suspect NT at the moment. (unless you can not get that serial port to work at all) Bu
- /archives//html/WriteLog/2001-04/msg00208.html (10,835 bytes)
- 8. [WriteLog] Re: WL10.26B and FT-847 (score: 1)
- Author: kkii@hcc1.bai.ne.jp (Katsuyuki ISHII)
- Date: Sat, 21 Apr 2001 01:15:50 +0900
- Hi, Steve: I installed an NT SP6a. I opened control panel and configured com ports in NT. de jr4isf -- Katsuyuki Ishii kkii@hcc1.bai.ne.jp -- WWW: http://www.writelog.com/ Submissions: writelog@conte
- /archives//html/WriteLog/2001-04/msg00209.html (8,114 bytes)
- 9. [WriteLog] Re: WL10.26B and FT-847 (score: 1)
- Author: kkii@hcc1.bai.ne.jp (Katsuyuki ISHII)
- Date: Sat, 21 Apr 2001 21:17:12 +0900
- Hi ! Yes. I had wondered the reason why my Writelog had displayed such funny things until I found the address for com port 2 was assigned to IrDA in my portable PC. I set in BIOS "IrDA - Disabled" no
- /archives//html/WriteLog/2001-04/msg00211.html (11,208 bytes)
- 10. [WriteLog] Re: WL10.26B and FT-847 (score: 1)
- Author: kkii@hcc1.bai.ne.jp (Katsuyuki ISHII)
- Date: Sun, 22 Apr 2001 05:55:11 +0900
- Steve Baron - KB3MM $B$5$s$O=q$-$^$7$? (B: Here are the com port settings in Writelog.ini: (on my console PC) [Ports] COM1:=9600,n,8,1 COM2:=9600,n,8,1 COM3:=9600,n,8,1 COM4:=9600,n,8,1 LPT1=0x3bc L
- /archives//html/WriteLog/2001-04/msg00212.html (8,761 bytes)
- 11. [WriteLog] Re: WL10.26B and FT-847 (score: 1)
- Author: jpixton@shentel.net (Jerry Pixton)
- Date: Sun, 22 Apr 2001 23:41:31 +0000
- Katsuyuki, Wow, everything seems to be working ok as individual components. I felt challenged today to install Writelog under Windows NT version 4.0 with Service Pack 6 just to see if there was some
- /archives//html/WriteLog/2001-04/msg00213.html (14,460 bytes)
- 12. [WriteLog] Re: WL10.26B and FT-847 (score: 1)
- Author: kkii@hcc1.bai.ne.jp (Katsuyuki ISHII)
- Date: Mon, 23 Apr 2001 18:41:15 +0900
- Jerry, thank you very much for your expeiments and advice. I can connect my FT-847 on Writelog. I attached my crossed cable between com port 1 of my console PC and FT-847. I started up Writelog, open
- /archives//html/WriteLog/2001-04/msg00214.html (8,602 bytes)
This search system is powered by
Namazu