Steve Baron - KB3MM さんは書きました:
>Are you chaging COM port settings in the Writelog INI file ?
Here are the com port settings in Writelog.ini:
(on my console PC)
[Ports]
COM1:=9600,n,8,1
COM2:=9600,n,8,1
COM3:=9600,n,8,1
COM4:=9600,n,8,1
LPT1=0x3bc
LPT2=0x378
LPT3=0x278
CWPTTCONTROL=2
CWPTTDELAY=0
(on my portable PC)
[Ports]
COM1:=9600,n,8,1
COM2:=9600,n,8,1
COM3:=9600,n,8,1
COM4:=9600,n,8,1
LPT1=0x3bc
LPT2=0x378
LPT3=0x278
CWPTTCONTROL=2
CWPTTDELAY=0
cwtypw=2
cwport=1
Comm1Used=CW,
Comm1RigManager={D0DE9244-0517-11D4-9D1B-00105AA43DDF}
Comm1XmitControl=ALWAYS
I cannot control my FT-847 or send CW messsage neither in both settings.
I borrowed a portable PC from a friend of mine on which he installs Windows
95. After installing Writelog 10.26B, I ran it and could control FT-847 and
send CW messages.
de jr4isf
----
Katsuyuki Ishii kkii@hcc1.bai.ne.jp
--
WWW: http://www.writelog.com/
Submissions: writelog@contesting.com
Administrative requests: writelog-REQUEST@contesting.com
Problems: owner-writelog@contesting.com
|