Amps
[Top] [All Lists]

[AMPS] HV Power Supply Capacitors

To: <amps@contesting.com>
Subject: [AMPS] HV Power Supply Capacitors
From: measures@vc.net (Rich Measures)
Date: Mon, 31 Mar 97 07:11:52 -0800
>Subject:     Re: [AMPS] HV Power Supply Capacitors
>Sent:        3/31/1997 5:17 AM
>Received:    3/31/1997 6:16 AM
>From:        Tom Rauch (W8JI), W8JItom@worldnet.att.net
>To:          amps@contesting.com
>
>
>
>The equalizing resistors should be selected to equalize the voltage, so
>you really have to know the leakage resistance tolerance of the
>capacitors to pick the correct resistor.
This is not what Sprague Co. says.  
 To the best of my knowledge, Mr. Rauch has yet to provide details of how 
"what you really have to know" is used to actually calculate capacitor 
equalizer  R.   How about sharing some "expert" calculations with the 
masses, Tom.  IMO, this could earn you some respect.  
Rich 

R. L. Measures,ag6k,805-386-3734    


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com

<Prev in Thread] Current Thread [Next in Thread>