Amps
[Top] [All Lists]

[AMPS] Re: Wanted: 2 X 4CX250r amp article

To: <amps@contesting.com>
Subject: [AMPS] Re: Wanted: 2 X 4CX250r amp article
From: Lane C. Zeitler" <km3g@cts.com (Lane C. Zeitler)
Date: Wed, 15 Jul 1998 07:25:18 -0700

-----Original Message-----
From: Mike Willis <m.j.willis@rl.ac.uk>
To: amps@contesting.com <amps@contesting.com>
To: <amps@contesting.com>
Date: Wednesday, July 15, 1998 7:05 AM
Subject: Re: [AMPS] Re: Wanted: 2 X 4CX250r amp article


>
>
>>>--
>>Another design to be considered would be the old YU1AW
>>design with 3 x 4CX250B, could be found in old DUBUS mag.
>>Very cheap to build since it doesnt use sockets and also
>>very easy to build, will put out up to 2500 Watts if you
>>squeze it a bit.
>>
>
>Squeze it a bit! Do you have to replace the valves after each over?

Webster's New World Dictionary defines squeeze as: ".....3. to get, extract,
or extort by force or unfair means."

Lane
KM3G
>
>
>--
>FAQ on WWW:               http://www.contesting.com/ampfaq.html
>Submissions:              amps@contesting.com
>Administrative requests:  amps-REQUEST@contesting.com
>Problems:                 owner-amps@contesting.com
>Search:                   http://www.contesting.com/km9p/search.htm
>
>


--
FAQ on WWW:               http://www.contesting.com/ampfaq.html
Submissions:              amps@contesting.com
Administrative requests:  amps-REQUEST@contesting.com
Problems:                 owner-amps@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>